Want this question answered?
5 Pounds per Square Inch
4324
A lot
There are two factors which determine the flow rate of water. Diameter and velocity. Resistance is not needed for determining the size of waterlines to their respective flow rates. Resistance is a component of velocity calculated for determining several aspects such as pump hp, and loss of velocity over a distance. The formula without the resistance component is: Q=Av where: Q=Flow Rate A=Inside pipe area v=velocity Calculate: Q= (3.14XR squared)v lets assume a velocity of 10 inches per minute For 1/2 inch pipe: Q = (3.14 X 1/4" X 1/4")X10 inches per minute Q = 1.96 Cubic inches per minute For 3/4 inch pipe: Q= (3.14 X 3/8" 3/8") X10 inches per minute Q = 4.41 Cubic inches per minute So one 3/4 inch pipe will carry roughly 12% more water than two 1/2 inch pieces.
One pound of water one inch.
10gpm
question cannot be answered because it depends on the water pressure
300 gallons per minute
2.5 gallons per minute
That depends entirely on the viscosity of the liquid in the pipe ! Water would flow faster than oil !
Water flow rate half inch PVC pipe 65 psi?
Depends on what's flowing (gas or water or something else) and under how much pressure.
As many as could flow through before eroding the piping to the point of no more flowing through and it simply spewing about.
As much as you want. But a larger quantity will take longer to pass through the hose.
100
If the flow velocity remains the same the flow volume will increase by the square of the diameter ratio.(2/1.25) = 1.6 = diameter ratio1.62 = 2.56 more flow volume through 2 inch pipe compared to 1.25 inch pipe.
5 Pounds per Square Inch