2
2
A local breaker backup relay is used to check the operation of distribution circuit breakers and to trip the feeder circuit breaker if the distribution circuit breaker fails to trip on an overload.
Circuit breakers do not have circuit diagrams. The breakers have an input where the distribution voltage is applied and an output where the load is applied. If you want to know what is inside a breaker, the electrical terminology to use is "shop drawings" of the specific breaker that you need information on.
an interlocking device
The electrical terminology for this type of breaker is a tandem breaker. It is where two breakers circuits can be in the same one breaker slot in a distribution panel. On this type of breaker there will be two output for a circuit value of what ever the breaker is rated for.
It allows the electrician to organize the distribution of electrical circuits, and holds the circuit breakers firmly in place.
false
Seeing that you are from Illinois you should know that in North America there are no 10 amp distribution panel breakers.
circuit breakers are connected in series manner in the circuit.
press the red test button
Breakers do not need routine maintenance. If the distribution panel is in an environment that allows dust or dirt to build up on the breaker faces, wipe the breakers with a dry cloth. If the distribution panel has a door on the panel face keep it closed.
No, this is stated very clearly in the electrical code. Only one branch circuit is to be allowed connected to each individual circuit breaker no matter what the amperage is. If a new branch circuit is installed and there are no spare breakers then most distribution panels have the ability to let tandem breaker be installed in it. Tandem breakers have two terminals and two handles and have the ability to fit into a single slot in the distribution panel.