To the IDE cable, 2 Hard disks can be connected as Master and Slave.(Hard disks that support IDE).
4 SATA ports could be used for 4 Hard Disks.
To start, the hard drive cable connects your hard drive to your motherboard. Its really simple.
They are the cables that connect your hard drive or cd/dvd drive to the motherboard.
CPU Motherboard Ram Graphics controller Hard drive Optical Drive
Drive manager
Not necessarily. "ATA-150" is SATA. If your motherboard has an IDE controller, the disk will work. If the board has only SATA, you will not be able to connect the drive without an adapter.
It depends on your motherboard. You'll need to refer to your motherboard specifications to find out how many (and of what type) hard disks you will be able to connect internally.
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.
The IDE/ATA bus controller manages the flow of information between the hard drive and the rest of the computer. At this point in time, The IDE/ATA bus controller is typically built into the motherboard so hard drives can be connected directly to the motherboard.
A sata cable connects a motherboard to a Sata hard drive. Modern power supplies have special chords made to power Sata hard drives where as old ones do not. Older computers have Eide cables to connect the motherboard to the hard drive.
The hard drive is not located on the motherboard.
An IDE connector is used to connect a CD-ROM drive or hard drive to a motherboard, with a long and flat ribbon cable.
What are the prosiejers to install a hard drive besides the computers motherboard