0
How many hours does it take to change an intake gasket on a 1999 Chevy blazer?
Wiki User
∙ 15y ago
The labor guide book gives 4 1/2 hrs. for a well trained mechanic to do.
It has to be done right, are you will be doing it over again.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where is the upper intake gasket on a 2001 Chevy blazer?
It is between the upper and lower intake manifold. The gasket is an o-ring type.
How to change the front intake manifold gasket on a 1999 Chevy Venture?
there is no upper intake gasket, only a front and rear
What is mechanic flat rate to replace intake gasket on 1997 Chevy blazer 4.3 vortec?
to replace the intake gasket would be about 4 hours labor. parts would run about $50
How do you change the intake manifold gasket on a 2005 Chevy Trailblazer?
www.trailvoy.com
How do you change the intake manifold gasket in a 3100 Chevy lumina?
take it to a mechanic
Change head gaskets 97 Chevrolet blazer?
Head gaskets are changed on a 97 Chevy Blazer by removing all engine accessories, taking off the intake manifold, removing the valve covers, and taking out the retaining bolts. The heads can then be lifted, the gasket removed, and a new gasket put in place.
How much does it cost to replace head gasket on 2001 Chevy blazer?
how much u think auto zone or pepboys will charge me to fixa head gasket on a chevy blazer 1996
How do you replace the lower intake manifold gasket in a 99 Chevy Venture?
there is no lower intake gasket, only a front and rear gasket
Will mixing different antifreezes make your intake gasket leak on a 1997 Chevrolet Blazer?
In short, Yes. Chevy made their gaskets a certain way to work with their coolants. Others tend to corrode the gasket prematurely.
How do you change the rearend fluid in a 95 Chevy blazer?
You have to remove the diff cover, then replace with new gasket and refill thru plug.
Labor time to change intake gasket on 5.3 Chevy?
21/2 hours if you know what you are doing
How do you replace 98 Chevy lumina intake gasket?
if you are going to replace the intake gasket you might as well change the head gaskets at the same time[it will cost you a little now but save you a lot later
