0
It depends on the type of architecture and controller u use. It can be found in the instruction set documentation. It requires 18 cycles on the Intel 8085.
How_many_machine_cycles_require_for_call_instruction_in_8085
What else can I help you with?
How many type of instructions does the 32-bit Intel 8086 have?
The Intel 8086/8088 is not a 32 bit machine. It is a 16 bit machine. It has 72 instruction types.
How many bus cycles are required for an unconditional or a conditional jump instruction in 8086 microprocessor to be executed?
when conditional jump instruction is executed it has 10 m/c cycles bt when nt executed it has 7 m/c cycles....while unconditional jump instruction has 10 m/c cycles...
What is the size of the instruction queue in 8086?
In 8086 the instruction queue is 6 byte long. This is because even the longest 8086 instruction is 6 byte long. Thus it is possible to prefetch even the longest instruction in the instruction set.
What is the last instruction of ISR in 8086?
IRET
What is size of instruction queue of 8086?
6 bytes
What is the length of the instruction queue in 8086?
6 bytes
Hoe to calculate the number of machine cycle and opcode fetch of any instruction?
It is not possible to calculate the number of machine cycles from first principles without going into design details of the CPU in question. You will need the reference book or card for the specific microprocessor model you are using. That will give you the actual number of cycles that are required for each instruction family. Note that many instructions take a variable number of cycles based on where they fetch their operands from. In the 8088 and 8086, in many cases the number of machine cycles is given in the form "4+EA". This means that you have to look up the number of cycles for a specific Effective Address, which is part of the op code, and add it to the number of cycles to execute the op code. There will be a table of machine stated for each type of Effective Address determination as well. Older machines like the 8085, 8086, and 8088 will actually have a few instructions, notably rotate and shift instructions, where the time is given as something like "4+2s". In these cases, the value "s" is the number of positions you are shifting the operand; to shift it 7 places takes 14 machine states, over and above the initial 2.
What is the need of Instruction PointerIP in 8086 microprocessor?
The Instruction Pointer (IP) in an 8086 microprocessor contains the address of the next instruction to be executed. The processor uses IP to request memory data from the Bus Interface Unit, and then increments it by the size of the instruction.
Why Intel kept the name 8086?
in 8086, there is instruction queue of 6 byte. It is one of the reason behind giving name. 8086 was introducing pipeline architecture.
Which instruction in 8086 microprocessor is 6 bytes long?
mov
Is lea SI1234h valid 8086 microprocessor instruction?
Yes.
Language of the 8086 machine?
Assembly
