0
Add your answer:
Earn +20 pts
What type of gas should you put in a 1994 Mercury Sable?
In a 1994 Mercury Sable : " regular " unleaded gasoline , 87 octane
Where do you put motor oil in the engine of a 1993 Mercury Sable?
Ummm...in the engine?
Blinking oil light 2002 mercury sable?
put some oil in it then!!
What type of power steering fluid can you put inside a mercury sable car?
Yes
How do you put brake fluid in 1993 Mercury Sable?
Master cylinder - located at drivers side firewall
Where do you put transmission fluid in 2000 mercury sable?
Right where the transmission dipstick goes. You will need a funnel
What kind of antifreeze do you put in a 1996 mercury sable?
According to the 1996 Mercury Sable owners manual :It came from the factory with a 50 / 50 mix of distilled water and GREENcolor antifreeze ( meeting Ford specification ESE-M97B44-A )
What kind of coolant do you put in a 2001 Mercury Sable?
According to the 2001 Mercury Sable Owner Guide : It came from the factory with a 50 / 50 mix of distilled water and GREEN color antifreeze ( meeting Ford specification ESE-M97B44-A )
What type of oil do you put in a 1996 mercury sable?
( 5W-30 ) is the preferred oil , according to the Owner Guide
How do you replace Mercury Sable front struts?
The front struts on a Mercury Sable are replaced by jacking up the vehicle, removing the wheels, and supporting the vehicle on jack stands. The retaining bolts can then be removed, the struts taken out, and new struts put in place.
Can you put a CD player in a 1998 Mercury Sable?
Yes, you can put a CD player in a 1998 Mercury Sable. Simply take the vehicle into an automotive audio shop. They will install a single or 6 disc changed CD player while you wait. They can also modify your antennae and other audio and speaker settings.
I own an 03 mercury sable ls and the check emission light has come on when i am idling at a red light or stop sign the car will stall if you dont put it in neutral and give it gas what could be wrong?
In my 03 mercury sable, I had the same problem and it was the PVC elbow hose. It had a huge hole in it and I saw online that this is a problem with the 24V sable.
