it has three mounts plus two torque mounts. It has one mount on the driver side, one other mount is on the top of the Transmission. and one that mounts to a bracket on the back side of the engine. the two torque mounts and on the front one is part of the AC bracket and the other is mounted to the front of the transmission.
No, it is a different model. The Honda Civic Si is a coupe but the Honda Coupe is not an Si. The Si is an upscale version of the coupe. It has more H.P. better suspension and cost allot more than the standard coupe.
b18c1, b18a1,b16 with custom or hasport motor mounts and the engine harness
No, custom fabrication is needed. Get a civic if you want drop ins.
Yes it will. Make sure you replace your motor mounts as they are most likely torn.
Yes, with custom mounts available online. You will need the complete swap.
yes. it requires mounts and loom. but any vtech engine will fit
Yes, with custom mounts available for purchase online. In order for it to fit you will need the complete swap.
3 or 4, Front, Left, Right, and optional back
If it is a Honda engine then yes you can. It sounds like your talking about an H-22 out of a Prelude. Look for Hasport motor mounts, I'm fairly certain they make some. You will have to grind your old motor mounts out, drill through your frame, and bolt in the new mounts.
a 1991 Honda civic motor
no
Honda civics engines and trannys are interchangeable. you could even put an acura integra motor into a Honda civic. the only one you may have a little trouble with is the prelude motor. from what ive learned, as long as there both the 4 cylinder, then they have the same motor mounts. so, you could swap your 90 motor with a 2000 k-20 from a Honda civic si. which the only thing is i think the shift linkage, because its a 6speed. yes, it interchanges. but you got a lot more options than that.