0
How many octets are part of the network id when using the subnet mask 255.255.255.0?
Wiki User
∙ 10y ago
3 octet
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
If internet protocol is 135.210.195.112 what is the subnet mask?
It depends on whether you are using a default subnet mask or you are subnetting the class B network. A default subnet mask would be 255.255.0.0, but if you are subnetting the last 2 octets in the subnet mask could be anything (up to 255 per octet).
How tocalculate subnet mask address?
Calculating a subnet mask depends on whether you are using the default, classful mask or a true subnet mask to divide a network into smaller pieces.The defaults are on octet boundaries (every 8 bits):255.0.0.0 class A network255.255.0.0 class B network255.255.255.0 class C networkAny other type of subnet mask with 4 octets (iPV4) can use combinations of those with any octet value from 0 - 255. No number may be larger than 255.Calculating other subnet masks would be based on how many subnets you want in the network. You could have values such as:255.192.0.0255.255.248.0.0255.255.255.252The first octet must at least be 255. The other octets may change, based on whether it is a classful default network or it is being subnetted.
How do you calculate a subnet mask address of networking?
Calculating a subnet mask depends on whether you are using the default, classful mask or a true subnet mask to divide a network into smaller pieces.The defaults are on octet boundaries (every 8 bits):255.0.0.0 class A network255.255.0.0 class B network255.255.255.0 class C networkAny other type of subnet mask with 4 octets (iPV4) can use combinations of those with any octet value from 0 - 255. No number may be larger than 255.Calculating other subnet masks would be based on how many subnets you want in the network. You could have values such as:255.192.0.0255.255.248.0.0255.255.255.252The first octet must at least be 255. The other octets may change, based on whether it is a classful default network or it is being subnetted.
How do you calculate a subnet mask address in networking?
Calculating a subnet mask depends on whether you are using the default, classful mask or a true subnet mask to divide a network into smaller pieces.The defaults are on octet boundaries (every 8 bits):255.0.0.0 class A network255.255.0.0 class B network255.255.255.0 class C networkAny other type of subnet mask with 4 octets (iPV4) can use combinations of those with any octet value from 0 - 255. No number may be larger than 255.Calculating other subnet masks would be based on how many subnets you want in the network. You could have values such as:255.192.0.0255.255.248.0.0255.255.255.252The first octet must at least be 255. The other octets may change, based on whether it is a classful default network or it is being subnetted.
Should computers on a network have the same subnet mask?
Subnet mask defines our network bit . If we are using a single network then all computers should have same subnet mask as well as the ip address, that belongs to the same network id.
You will be using ip address 126.0.169.48. You need to to subnet your network so that there are 4000 subnets. what is the custom subnet mask what is your subnet address?
255.255.240.0 126.0.160.0
What is the network IP of 170.3.24.14 host IP?
It depends on your subnet mask. IP addresses begining with 170 are Class-B networks and if your using classful network boundries, then the network would be 170.3.0.0. But, its unlikely you're using classful boundries these days. The most common subnet uses a 24-bit subnet mask (255.255.255.0). It that's the case, then the network would be 170.3.24.0 There are of course other possibilites- everything depends on the subnet mask.
What is the valid ip address with network number 190.254.0.0 using 11 bits?
This assumes you know how to subnet. On a network with 190.254.0.0 as a host address and using 11 bits for the subnet mask. The network address is 190.224.0.0 and the end of the range is 190.255.255.224. The address you show is within this range so cannot be the network address. If you don't know how to work this out manually use a subnet calculator such as the one on this URL: http://www.boson.com/FreeUtilities.html
What is your subnet address if your ip is89.125.27.81?
The subnet address for this ISP could be almost anything, depending on how the ISP breaks up a larger network pool into a smaller one. The default subnet would be 255.0.0.0, but that is not very likely with an ISP. You can check by using the 'ipconfig' command in Windows to see the subnet mask, or 'ifconfig' if using Linux.
What is the default subnet mask for the IP address 72.224.56.62?
Since this is a Class C address, the default network mask is 255.255.255.0.Since this is a Class C address, the default network mask is 255.255.255.0.Since this is a Class C address, the default network mask is 255.255.255.0.Since this is a Class C address, the default network mask is 255.255.255.0.
What is the motivation behind using a custom subnet mask versus the default subnet mask?
A default subnet mask gives you classful addressing on octet boundaries. A non-default subnet mask implies that you are subnetting a larger network into several smaller ones.
What is the default subnet mask for IPv4?
The submask indicates the division between the network id and the host information in an ipV4 address. The default subnet mask indicates the presence of a class A, B, or C based network (the default) without subnetting.
