It doesn't matter how many things there are in the circuit, or what they are.
If it's really a series circuit, as you say, then there's only one single path through it.
There's no point anywhere in the circuit where current has a choice of which way
to go.
If a lamp burns out in parallel circuit, the other two lamps will continue to glow. If a lamp burns out in the series circuit, the other two lamps will also go out. If 3 lamps are in one series circuit, and one of them goes out, the loop is disconnected.
A torch is simply a circuit containing a battery, a bulb and a switch. The three components are connected in series (one after the other) to form a loop. The switch simply completes the circuit so that power flows from the battery to the bulb.
If you are talking about the light circuit then : The Battery, The bulb and the wire.
Simply add all of the component's resistances together and that will give you circuits total resistance. If you're dealing with a 'series-parallel', or 'parallel' circuit, the equations will change, but in a simple series circuit, the total resistance is just the total of all the component's resistance.
5 ohms.
the three types of circuits are series, parallel, and series-parallel.AnswerThere are, in fact, four types or categories of circuit, not three! These are series, parallel, series-parallel, and complex.The term 'complex' is somewhat misleading, because a 'complex circuit' is not necessarily complicated (although they often are!) but merely the collective name for any circuit that isn't series, parallel, or series-parallel. A simple example of a complex circuit is a bridge circuit, such as Wheatstone's Bridge.
In a parallel circuit, Voltage is constant through out the circuit. Thus, the voltage across each lamp is 6-volts.
The resistance of a series circuit is simply the sum of the individual resistors.
If a lamp burns out in parallel circuit, the other two lamps will continue to glow. If a lamp burns out in the series circuit, the other two lamps will also go out. If 3 lamps are in one series circuit, and one of them goes out, the loop is disconnected.
In a series circuit there is only one path for current to flow. The current will flow through each good lamp. If any lamp opens (blows), then the circuit is broken and current flow stops. The older strings of Christmas tree lights used to be connected in series and it was hard to fine the blown bulb. If there were two burnt out bulbs almost impossible to find.
Two wires are simply the AC power cord running the length of the string to power the next string. The third wire is a series circuit of all the lamps, connected to one side of the power cord at the plug end and the other side of the power cord at the socket end. The bulbs are low voltage lamps designed with a mechanism to short them out when they burn out so the other lamps stay lit and you can identify the failed one and replace it. If you remove a lamp the whole string will go out until it is replaced, because they are a series circuit.
Do nothing. But in a parallel circuit, all the bulbs will get dimmer.
There are basically two types of circuits: parallel and series. In a series circuit, current flows in one continuous straight path. In a parallel circuit, the current has more than one path to follow.AnswerThere are four categories of circuit, not two. These are 'series', 'parallel', 'series-parallel', and 'complex'. A 'complex circuit' describes any circuit not falling into the first three categories.
Christmas lights , house alarm , and house Christmas lights , house alarm , and house
If a three light circuit is connected in series with two 6V batteries, and the three lights are identical, the voltage across each of the lights is 12V divided by 3, or 4V.
To calculate the current in the parallel circuit we need the concept of ohms law, V=IR we know the resistance, R=48 ohms voltage will be constant as 220-230 volts so, I= V/R = 230/48 = 4.791 A Add currents of three lamps, ie., I = 14.375
Complex Circuit