Do nothing.
But in a parallel circuit, all the bulbs will get dimmer.
All of the bulbs will become dimmer as more bulbs are added.
Series circuit.
If a circuit is wired in parallel, all the bulbs have their own independent access to electricity, so if one bulb goes out, the others are not affected. If the circuit is wired in series, then one bulb going out will block the current to all the other bulbs as well.
Series:It is impossible to control the bulbs individually. This is one reason that series circuits are not practical for use in home lighting: It is not possible to control the lights in different rooms throughout the house on the same circuit. For example, if someone wanted to read the newspaper or watch television, he would have to turn on a switch that would put on every light and electrical appliance in the whole house.Also, in a series circuit, the more output devices you add the slower the current becomes. If these output devices were, for example, bulbs, this would mean that the brightness of the bulbs would be dimmed. Another disadvantage of a series circuit is that if a bulb were broken or the pathway broken in any way, the other bulbs would go out too.Advantages are that you can add more power sources, like batteries, and increase the force of the output which grants you more power. In Parallel, however, the power stays at the same voltage of the original power source. For example, if you were running a circuit on a 5-volt battery and it kept the bulb going for two hours and then added another 5-volt battery, it would keep the bulbs going for four hours instead, but it would only give out 5-volts instead of increasing it to ten.Parallel:Advantages would be that, if it were light bulbs that were the output devices linked in parallel, if one bulb broke the others would continue going. Also, the brightness of the bulbs would be greater than the brightness of bulbs in series.Disadvantages are that there could be a risk of fire in some cases. Another would be that, if you have multiple power sources, the power stays at the same voltage as that of the single power source. In parallel, increasing the number of output devices does not increase the resistance like it does in series.
When bulbs are connected in series to one another, a failure of one bulb will open the circuit and the remaining bulbs in the line will go out because they have no power. However, bulbs in the line preceding the failed bulb will continue to be lit because their source of power has not been interrupted. When bulbs are connected in parallel, a failure of one bulb will have no effect the remaining bulbs because the power is not routed through any single bulb alone.
By adding more light bulbs
A: Adding any resistance bulbs or whatever in a series circuit will reduce current and will reduce total power. In this case the bulb will glow dimmer as any additional bulbs are placed in the series circuit. this is true if the same input source is kept constant.
In series
Yes. The current is inversely proportional to the resistance. I = V / R where I is current, V is voltage, and R is resistance. Adding light bulbs adds resistance. Current is constant throughout a series circuit; it doesn't change no matter what. Voltage changes.
All of the bulbs will become dimmer as more bulbs are added.
ANSWER: The brightness of both bulbs will decrease. If the bulbs are identical the current will decrease to 0.2 Amps. This is a simple series resistive circuit, the more bulbs you add in series both the amperage and bulb brightness will continue to go down.
That is a series circuit. An example is old christmas tree bulbs where if one burned out they all went dark.
In a series circuit, all bulbs are necessary to complete the circuit. If one bulb goes out, the circuit is broken, so none of the bulbs would light up.
Series circuit.
Well it can depend on how many bulbs it has etc, but generally it would be a series circuit.
As the number of bulbs in a series circuit increases, the current decreases. As the number of bulbs in a parallel circuit increases, the current increases.
If a fourth bulb were added in a similar way to the three existing bulbs, the resistance in the circuit would go up if the bulbs were series connected, and it would go down if the bulbs were parallel connected.