A standard floppy drive cable in a computer has 34 pins.
Floppy data cable has 34 and the IDE has 40
34 pins
3 types of ribbon cables found in a PC are, a 34-pin floppy drive cable with twist, a 40-pin IDE cable with 40 wires, and a 40-pin IDE cable with 80 fine wires(80 conductor cable)A floppy drive cable, an IDE cable, and a CD or DVD drive cable
1. A floppy cable will almost always contain a small "twist" in it, in which a port of the wires are turned in reverse.2. A floppy cable has 34 pins. A PATA hard drive cable has 40 pins.
how many wires does a coaxial cable have
There are two cables connected to the floppy drive; Power cable - 4 pins, Data cable - 34 pins.
Floppy Ribbon : The floppy cable has 34 wires. There are normally five connectors on the floppy interface cable, although sometimes there are only three. These are grouped into three "sets"; a single connector plus two pairs of two each (for a standard, five-connector cable) or three single connectors. IDE Ribbon : IDE cables consist of either 40 individual wires or 80 individual wires. Ultra ATA/66 or later devices need the 80 wire cables to operate efficiently. Most of these wires are used to transfer data between the motherboard and the drives.
used on a floppy
2
a cable for connecting a floppy drive to the computer motherboard.
2 wires auv cable, and power cable
There are two cables that connect to the floppy drive in a desktop computer.There is a four pin power cableThere is a ribbon cable that has a part twisted end (the twisted end connects to the floppy drive).
A ribbon cable is a cable with many wires running parallel to each other and are most commonly used inside computers connecting hard drives, cd drives and floppy drives. Older computers used them as external connections as well.
3