The 8086 microprocessor has 40 pins.
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
three ,A,B$C.
queue of 8086 microprocessor is 6 bits
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
it is a 16 bit microprocessor & it has 40 pin .
Pins 1 and 20 in the 8086 microprocessor are (both) power and signal ground (GND).
There are 256 ports available in the 8085 microprocessor. The IN and OUT instructions have an 8-bit port number, and that is where the 256 comes from.In order to use ports, the hardware addressing system must decode IO/M-. Some implementations don't do this, so they map IO addresses to memory addresses. In that case, you could say there are 65536 possible IO addresses, but that is not the same as ports, because ports are specific to the IN and OUT instructions.The other "problem" with IN and OUT is that you cannot specify the address in a register, while you can do so with indirect memory addressing.
8086 main application is to evaluate the arithmetic operations in any systems that uses 8086
8
Two ground pins are used in the 8086 microprocessor to increase the bus pull-down current capacity.
Which microprocessor accepts the program written for 8086 without any changes?