Top Answer
User Avatar
Wiki User
Answered 2014-02-25 01:32:20

A 1988 Jeep Wrangler needs 6 quarts of oil for an oil change.

User Avatar

Your Answer

Still Have Questions?

Related Questions

How many quarts of oil are required for an oil change on a 1988 Jeep Wrangler?

Four cylinder needs five quarts, six cylinder needs six quarts

How many quarts of oil does it take for a 1988 Jeep Wrangler?

For an oil and filter change, the 6 cylinder engine holds 6 quarts of oil. For an oil and filter change, the 4 cylinder engine holds 4 quarts of oil.

What oil does a Jeep Wrangler 1988?

on a 6 cylendar 1988 jeep wrangler what viscosity oil is used

Oil capacity for a 1988 Honda accord?

4.5 Quarts with oil/filter change.

How much transmission fluid dexron 111 is needed for a 3.8 engine size of 1988 Buick Lesabre?

With the torque converter about 11 quarts. without about 7 quarts.

1993 wrangler when the headlights are on the left turn signal doesn't work?

I had the same problem with my 1988 jeep wrangler and all I did was change the rear left bulb and never had the problem again.

Will a top from an 1988 wrangler fit a 1991 wrangler?

Yes, 1986 to 1995 tops are interchangeable!

What is the paint color for a 1988 green jeep wrangler Sahara?

The paint code for a 1988 Jeep Wrangler Sahara is PJ5 it is also called yellowish green.

1988 ford thunderbird how many quarts of oil?

According to my Chilton's Auto Repair Manual : With engine oil filter change : The 1988 Ford Thunderbird engines ( 2.3 / 3.8 / 5.0 ) take : ( 5.0 U.S. quarts )

1988 jeep wrangler runs while cranking quits when you let off?

you have an open circut in your ignition switch change your ignition switch.

What is the towing capacity of a 1988 4.2 liter Jeep Wrangler?

You should not tow more than 2,000 pounds in a 1988 Jeep Wrangler. This is considering the engine is a 4.2 liter engine.

Will a 1988 Jeep Wrangler YJ fit on a 2000 Jeep Wrangler?

Very few parts are interchangeable from a YJ to a TJ.

What is the oil capacity for a 1988 5.0 mustang?

With engine oil filter change : 5.0 quarts ( 4.7 liters ) of engine oil

What is the number of quarts of oil needed for an oil change in a 1988 Ford with a 460 motor?

Park the vehicle on a level surface. Drain the oil and change the filter. Add 5 quarts of oil and start the engine. Run for 1 minute, shut down, wait 30 minutes and check the oil level. Add as necessary to fill to the full mark. You now know the capacity.

How many quarts of oil are needed to give a 1988 Ford Taurus gl 3.0 liter v6 an oil change?

Probably 4-5 Add 4 then check level Be sure to review the "Related Questions" below for much more on this topic...

Is the lug pattern the same for a 1988 Jeep Wrangler and a 2000 Jeep Wrangler?

Jeep Wrangler wheel lug patterns years 1987-2006 are 5X4.5Jeep Wrangler wheel lug patterns years 2007-2014 are 5X5

What is the correct factory tire size for a 1988 Jeep Wrangler?

The correct factory tire size for a 1998 Jeep Wrangler is 225/75/15.

What is the coolant capacity of a 1988 grand wagoneer?

15.5 quarts plus 1.5 quarts in overflow tank

Will 1993 jeep wrangler full steel doors fit a 1988 wrangler?

Yes, the full steel doors will fit all 1987-95 Wranglers.

Will a 1988 Jeep Wrangler soft top fit your 1987 Jeep Wrangler?

Yes. 87 and 88 are the same as long as the factory hardware is still in place.

How much oil in a 1988 Jeep Cherokee?

4 Cyl: 4 quarts 6 Cyl: 6 quarts

Still have questions?

Trending Questions
Do potatoes have genders? Asked By Wiki User
Who was Anna Kreisling? Asked By Wiki User
Unanswered Questions