4
the AC-A ~A Range is safe, or for high resolution the mAµA~ range, if it is shure that there is no more than 300mA
The analog multimeter has a wider range.
Parts of a digital multimeter include an LCD display and range knob. There are also common ground, positive voltage terminal, and positive current terminal.
Fluke was formed in the late 1980s by Mike Bryant, Jon Fugler, and Mike Tournier. Julian Nugent served as the band's manager. The band is noted for a wide range of electronic styles.
There are many different ranges, depending on the type (and expense) of the equipment involved. The range will be printed in the specifications for the device.
The highest voltage scale on a hand held multimeter is 5000 volts.
This is a very broad subject. It is best to find the instruction manual that is printed for the multimeter and study it while the meter is in front of you. This way you become familiar with the multiple operations.
Amperage is measured by a multimeter. First determine the amperage rating on the multimeter. Next, select the appropriate setting on the tool. The next step is to set the range on the multimeter. Make sure to plug the leads into the appropriate terminals. Run the circuit through the multimeter to measure the current. Turn off the breaker, make sure the AC circuit is turned off, then rewire the circuit.
To find faults in components using a multimeter, set the multimeter to the correct testing mode for the component (such as resistance or continuity), then connect the leads to the component's terminals. Check for the expected resistance values or continuity to determine if the component is faulty. If the values are outside the expected range or there is no continuity, the component may be faulty.
Restart hit f8 go to restore settings that recently worked
Resistors have tolerance. So does the multimeter. Standard resistors range from 20% (no fourth band), to 10% (fourth band silver), to 5% (fourth band gold). Resistors will not normally measure exactly what you expect, and proper circuit design must take this into account.The multimeter may not be calibrated correctly.
None