how do I change spark plugs on 2002 Toyota tacoma v4
how many spark plugs in the v6 2.7l 2003 Hyundai sonata?
you asked about the v4 engine but the contour had a v6 or an inline 4 but no v4 ,,,,plugs on these cars are under the valve cover lid and should take only a few bolts holding it on. but if you've never done this before leave it to a pro since they can be tricky as the spark plug can pull its threads out ...
Obviously 3 in front the rear plugs can be accessed only after removing the plastic engine cover and partially or fully removing the intake manifold!
Remember the order of spark plug wires while connected. Disconnect spark plug wires. Make sure that there is no sand or dirt around before removing the plugs. Remove the spark plugs. It's a good idea to have a magnetic spark plug socket. Insert a new spark plug in the socket, be careful, do not drop the plug. Usually plugs come with preset gap and do not need adjustment. If you change gap most likely you will have to get a new spark plug. Install spark plugs. The torque should be around 45 N*m. Connect the wires in the order. Start the engine.
replace the valve cover gasket, easy fix
It is not a V4 it is either a I4 or V6. Honda recommends you replace the spark plugs at 105,000 miles. As the cam belt on a V6 must be replaced at 110,000 miles I would recommend you replace them both at 105,000 miles. If you have an I4 then there is no belt to replace so I would recommend you replace the spark plugs at around 100,000 miles. Be sure and use an OEM plug. This is also a good time the service the cooling system.
While it could, Chrysler does not offer a V4 engine.
Yes but the V4 engine has not been widely used in cars.
You probably have a 4 cylinder engine (A.K.A. the V4 Engine), V4 engines aren't very powerful, I previously had a V4 and I had the same problem.
Count the number of spark plug wires.
However many cylinders there are. V8=8 V6=6 V4=4 In-Line 4=4