3
2
2
There are some basic files which are needed to load in the RAM for booting the system. Coming to your question, All the boot files are loaded in the RAM while starting up the systems, and this information is temporary in nature. this information destroys everytime system shutdown.
Press the F8 key while the system is booting. Then choose safe mode.
Cold booting occurs when the electrical power (the switch button) on the system unit is turned and warm booting occurs when the computer system restart or reset without turning off the power.
In DOS, you cannot bypass Config.sys.. However you can select or deselect the options by pressing F8 key during boot..
When the computer start all the essential files, to start the operating system load from disk to the memory.Basically the bootstrap program is loaded into the read only memory(ROM) which enables while the computer start.
Generally not, but it depends on your operating system. Most computers will require you to restart and use a keyboard shortcut to access the BIOS setup while it is booting.
By booting the system in safe mode, going to My Computer Properties and selecting the advanced tab and changing the Startup and Recovery settings to change the way Windows responds to a STOP error during startup so you can see the STOP error screen to get the information on what is causing the problem.disable automatic restart on system failure.
“service sucks and while im playing it just keeps booting me out of online games!”
Yes. While the computer is booting up, keep pressing the escape key until it appears.
C
Scan now
Yes, it will just take a while!