While Amps and Volts are both units of electrity, they are quite independant.
Total electrical energy is measured in "watts".
Amps * Volts = Watts.
You can get 100 Watts with 10 Volts @ 10 Amps.
You can get 100 Watts with 100 Volts @ 1 Amp.
You can get 100 Watts with 1,000 Volts at 0.1 Amp.
It's like asking, "How do you get water flow of 20 gallons per minute?"
You COULD have a 3 ft diameter pipe with very low pressure, or you COULD have a 1/2 inch pipe with very HIGH pressure. Both could give you the desired 20 gallons per minute.
It depends on the voltage.Amps times volts equal watts
You have your own answer. It is 1.5 amps.
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
There are no "watts" in 2.5 volts. Wattage is the result when you multiply volts times amps. You cannot answer the question with only one quantity (in this case 2.5 volts). If you have 1 amp and 2.5 volts, they you would have 2.5 watts. If you had 2 amps and 2.5 volts, they you would have 5 watts. The formula is Volts X Amps = Watts.
It's not that simple. The basic formula is Volts / Ohms = Amps. For 30 Volts you'd get 0.5 Amps, for 60 Volts you'd get 1 Amp, for 120 Volts you'd get 2 Amps.
4 volts and how many amps? Watts = amps x volts. It depends on the amount of current (in Amps) flowing at 4 Volts... See Ohms Law: Watts = Volts x Amps If you have 2 Amps flowing at 4 Volts you are dissipating/consuming 8 Watts. If you have 10 Amps flowing at 4 Volts you are dissipating/consuming 40 Watts.
It depends on the voltage.Amps times volts equal watts
160 amps at 12v.
160 amps at 12v.
You have your own answer. It is 1.5 amps.
Ohm's law: Volts = Amps * Ohms, or Amps = Volts / Ohms 12 volts / 0.5 ohms = 24 amps
Watts = Volts * Amps Therefore: 70 Watts / 13.8 Volts = 5.07 Amps
The formula to calculate the relationship between amps, volts and watts is Volts X Amps = Watts or Volts = Watts / Amps or Amps = Watts / Volts therefore; 200 Watts divided by 1.95 Amps is 102.5641 Volts.
It depends on how many Amps (current) are applied to the voltage. Watt = Volts x Amps. e.g. 12 volts @ 5 amps = 60 watts
There are no "watts" in 2.5 volts. Wattage is the result when you multiply volts times amps. You cannot answer the question with only one quantity (in this case 2.5 volts). If you have 1 amp and 2.5 volts, they you would have 2.5 watts. If you had 2 amps and 2.5 volts, they you would have 5 watts. The formula is Volts X Amps = Watts.
Milli amps is a measure of current whilst watt is a measure of power. The missing element is voltage as the formula is:- Power = Voltage * Amps ie power in Watts is the product of Volts (in Volts) times Amps (in Amps)