The 12 v light should have the voltage and the power in watts printed on it. When it is running, it uses that amount of watts continuously. The energy is measured by the watt-hours, in other words the watts multiplied by the number of hours it runs for. 1000 watt hours makes 1 kilowatt-hour, which is a Unit on the electricity bill.
Multiply the current by the voltage: 120 times 0.3, which is 40 watts.
Watts = Amps x Voltage x Power Factor Hence to compute watts you need to know voltage and power factor. If you have a pure resistive load like a light bulb power factor = 1 and can thus be ignored. If you are asking about residential power, the voltage is 120 VAC so the computation is now trivial.
You multiply volts by amps to get watts. What are your amps?
The watts means nothing without the voltage.
Depends on the size of the LED light and the voltage applied. An example is an LED 24 volt globe light that pulls 8 watts which draw 0.333333 amps. Take an LED 120 volt light bulb draws 12 watts and will pull 0.1 amps. The same bulb at 240 volts wil draw 0.05 amps. it really depends on the watts and voltage applied. An average would be about 0.1 amps.
Need a voltage to answer this question.
Voltage times current is equivalent to power (watts). You need to keep in mind that milli amp hours (mAh) is amps with a unit of time - it's a specific amount of current for 1 hour. Watts is an instananeous measurement; watt hours is the equivalent you should be looking for. there is no direct conversion for watts from voltage and mAh.
The problem here is that "Ah" (ampere-hours) is not a unit of energy. To convert that to units of energy, you need to multiply by the voltage of the battery. The result, of course, will vary depending on the battery type.The result of this multiplication would give you ampere-hours-volts, or watts-hours (watts times hours). Therefore, you can then divide by the number of watts used, to obtain the time (in hours).
Divide the wattage by the voltage. If it is 120Volt then the answer is .15Amp
Look on the light bulb for the voltage and the power in watts. Then divide the watts by the voltage and that gives the amps. Some CFL bulbs also state the current as well as the voltage and power, which is because they can have a poor power factor.
Multiply the current by the voltage: 120 times 0.3, which is 40 watts.
Amps times volts = watts Watts measures the rate of power usage. watts times hours = watt hours Watt hours is a measure of the amount of power used.
To obtain amps from watts a voltage must be given.
It depends on the bulb, how many watts it is. All bulbs are marked with the correct voltage and the power taken, in watts. You multiply the watts by the number of hours to find the watt-hours of energy used. Then divide by 1000 to find the kilowatt-hours. A kilowatt-hour is also called a unit and you pay about £0.15 for a unit of electricity. Let's say it's a 100 watt bulb running for 24 hours. That uses 2400 watt-hours or 2.4 kilowatt-hours, which costs about 2.4 x £0.15 which is £0.36.
Need to know the voltage. Quantity of electricity is expressed in Watts. Watts = amp x volts. Total quantity is expressed in watt/hours.
You just have to divide the watts by the voltage to find the amps. For example 60 watts on a 120 v system would take ½ amp.
600 This depends on the voltage Voltage x Amps = Watts ex. At 120 volts 5 amps WILL BE 600 watts But at 110 Volts (Some house voltage), it will be 550 watts And at 277 Volt (commercial-Industrial Voltage), it would be 1385 Watts If you know Watts (Like a 75w Incandescent Lamp) and the Voltage: Watts / Volts = Amps So 75w / 120v = 0.625a The last would be Watts / Amps = Volts 600w / 5a = 120v