That of course depends on who made the water heater and what model number it is you could always call the manufacturer. Quickest way I know of is to look at the heating elements. They will have a wattage rating. This number is visible when you take the cover or covers off, move aside the insulation and use a flashlite to spy the pesky little rascals.I suggest you shut off the voltage first. My 80 gal has 2 elements of 4500 watts each if I'm not mistaken. All you need to do is multiply the Volts by the Amps and that equals watts
There are zero watts in 220 volts. Watts are the product of amps x volts.
To give you a better answer I need to know the amps. To give you an idea If you your appliance is 220 volts and 30 amps it would equal to 6600 watts if it uses 20 amps it would use 4400 watts. All you need to do is times the amps and volts.
Watts (power) are calculated by multiplying amps (current) times volts (potential).
Your question cannot be answered without knowing how many amps are flowing in the wire.
Watts are not rated in amps. Watts are the product of amps times volts.
12.500 kwh
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
Watts = volts x amperes. So if your region uses 110 volts, 20 amperes is equivalent to 2200 watts; if your region uses 220 volts, 20 amperes is equivalent to 4400 watts.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
If you are asking about 220 watts, remember Watts equal power, which is Volts times Amps. Amps are used to measure current - how many electrons flow past a certain point per second - so there is no answer to this question. If you meant to ask what current a load of 220 Watts would take if the applied voltage was 110 Volts, the answer is 220 Watts divided by 110 Volts = 2 Amps.
The formula for watts is, Watts = Amps x Volts.
The equation that you are looking for is I = W/E. Amps = Watts / Volts.
10000 watts / 220 volts = 45.4545 amperes
Watts = volts x amperes. So if your region uses 110 volts, 20 amperes is equivalent to 2200 watts; if your region uses 220 volts, 20 amperes is equivalent to 4400 watts.
watts = volts x amps, example-2 watts=2 volts x 1 amp, example- 2 watts=120 volts x .60 amp.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
If you are asking about 220 watts, remember Watts equal power, which is Volts times Amps. Amps are used to measure current - how many electrons flow past a certain point per second - so there is no answer to this question. If you meant to ask what current a load of 220 Watts would take if the applied voltage was 110 Volts, the answer is 220 Watts divided by 110 Volts = 2 Amps.
The formula you are looking for is I = W/E. Amps = Watts/Volts.
The formula for watts is, Watts = Amps x Volts.
You need the formula: Amps * Volts = Watts But you get to do the math.
Volts * Amps = Watts 12 Volt * 2 amp = 24 Watts
The answer is 40,000 divided by 415 or 96.38 Amps. Watts is volts times amps.
volts times amps equal watts. So 12 volts times ? amp equals 1.5 watts. The current is 1.5/12 amps, which is 1/8 amp.