Assuming 100% efficiency, there are 746 Watts per Horsepower, so 115 Volts multiplied by 15 Amps should be 1725 Watts divided by 746 Watts per HP yields 2.3 HP. I generally assume about 1 kW per HP which would result in about 1.7 HP. The current noted may be starting current and the running current may be significantly less.
At 600 volts 15 HP. Single phase formula, HP = Amps x Volts x Eff. x pf/746.
Need to know the running amp draw. Starting amps would be useful l too. The average amp draw for a simple 1hp motor is about 7 amps, such as a fan motor. Ohms law says amps times voltage = watts, so 7 amp times 120v=840 watts. Consider that starting amperage is about 1-1/2 times running load, starting watts would be about 1200. You would need about a 1200 watt inverter to run that motor.
The formula you are looking for is Watts = Amps x Volts.
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
how many watts does it take to run a paint sprayer
Need to know the running amp draw. Starting amps would be useful l too. The average amp draw for a simple 1hp motor is about 7 amps, such as a fan motor. Ohms law says amps times voltage = watts, so 7 amp times 120v=840 watts. Consider that starting amperage is about 1-1/2 times running load, starting watts would be about 1200. You would need about a 1200 watt inverter to run that motor.
75 kw motor
Assuming you mean 12 volts, then you cannot run any 78 Amp fans. Unless your fans run at 0.38 volts, there is no way to draw 78 amps from 30 watts.
The formula you are looking for is Watts = Amps x Volts.
20 Amp * 120 Volts = 2400 Watts 2400 Watt * 80% max use = 1920 Watts planned normal usage for a circuit with a 20 Amp breaker.
The power (in watts) can be calculated using the formula: Power (W) = Voltage (V) * Current (A). In this case, the power required to run the 3 amp well pump on 220 volts is 660 watts (220 V * 3 A = 660 W).
No you will not even get close to 1600 watts from that amp. If you read the spec for the amp they were putting 16-18 volts into the amp to get the claimed wattage. In your car you will be lucky to get 13.5 volts. You will see maybe 350 watts. A good rule when buying amps is a good amp will run about $1.00 a watt. So a $300 amp will be @ 300 or so watts.
how many watts does it take to run a paint sprayer
The formula for watts (or power) is Amps times voltage. Therefore with a 6 amp draw times 120 volts would be about 720 watts. A 1000 watt power inverter would do the job.
Wrong question. I assume that this pertains to a car and not a house. All modern cars run on a 12-volt system. So what I think you meant to ask is "how many AMPS in 90 watts at 12 volts?". Watts divided by volts equals amps, so 90 watts divided by 12 volts equals 7.5 amps. If you are trying to wire in a car stereo amp, better go with a 10 amp fuse.
Any amp capable of pushing up to 1500 Watts will do the trick, and shouldn't be too expensive to come across.
It depends on the battery's voltage. Such a battery's capacity is given in ampere-hours, not amperes. An 850 amp-hour 12 volt battery can theoretically operate a 12 volt motor for about 12 minutes but in practice it's probably, maybe a lot less, since the motor will probably stop as the battery nears its depletion.