Want this question answered?
24.7675 ton 1 US (short) ton = 2000 lb 1 UK (long) ton = 2240 lb 1 tonne (metric) = 2204.6 lb
tons, a plural but one ton of rocks
I'm not an air conditioning expert, but I would expect that the compressor will run a lot more than it needs to. A 2 ton coil will not cool as much air as a larger capacity 3 ton coil. Experts?
4,000 Lbs 2,000 LBS/ ton
Each dollar bill is one gram. There are 2000 pounds in a ton, and 453.6 grams in a pound. Multiplied, you get $907,200. Used bills are slightly heavier than new, though. This example was with new.
Typically, the number of wheelbarrow loads in a ton of sand depends on the size of the wheelbarrow and the consistency of the sand. However, as a general estimate, a standard-sized wheelbarrow can hold about three to four cubic feet of material. Since there are 27 cubic feet in a cubic yard, and a ton of sand is approximately 2,000 pounds, that means a ton of sand would roughly fill up nine to twelve wheelbarrow loads. It's important to note that this estimate may vary depending on the exact weight and density of the sand being used, as well as the efficiency of loading and unloading the wheelbarrow.
Assuming an 8 cubic foot capacity wheelbarrow, roughly 2.3 loads. 1 cubic yard of 3/4" minus gravel is approximately 1.4 tons, therefore 2/3 cy is approximately 1 ton and one load from an 8 cf wheelbarrow is a little less than 1/3 of a cy.
1 metric tonne = 157.473044 stone
1 short ton = 142.857143 stone
1 US ton is 142 stone 12 pounds.
1 tonne = 157.47 stone
It depends on the exactly were you live in central pa a yd of 2b is about 1.6 ton. Yes stone has different density
The word stone meets those specifications.
Weight of 1 cu.ft. stone chips
about 6 cubic feet
stone
143 stone = 1 ton us