answersLogoWhite

0


Best Answer

As far as I know; to equal ft. and inches (366sq. ft. and 6 inches ) if you convert this iti is 366 divided in half to give you a 12 inch depth =183 cubic ft and divide by 3 to get cubic yards = 61 cubic yards

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many yds of concrete in 366sq ft of floor 6inch thick?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is 3.5 thick concrete ok for a basement floor?

yes it is, if that is the bottom floor


How thick is the concrete floor for a house?

This depends on the age and whether it has a basement or not


How many yards of concrete do you need for 96 feet of 6Inch curb and gutter?

16.667 yards of concrete in a 30 ft x 30 ft x 6 in there are 27 cubic feet of concrete in one yard IE: 27 square ft, 12 inches thick or 54 square ft, 6 inches thick


Is the word thick a abstract or concrete?

Thick is an adjective not a noun


How thick is concrete floor in a basebent?

it should be four inches on a sub-base of sand and/or gracel plus reinforcement bars or heavy screen if it was well made.


Amount of concrete in rectangular floor slab that measures 13m x 6.7m x 100mm thick?

13 x 6.7 x 0.1 = 8.71m3


How much concrete for 10ftx10ft square area?

It depends on how thick you want the concrete.


How do you remove a concrete floor about 5 inches thick with hand tools?

Get a nice big sledge hammer, (probably a 12lb) and go at it as hard as you can. Use a smaller hammer and chisel for the corners.


How do you ceramic tile over glue down vinyl tile?

If it has a timber floor under and vinyl is solid to the floor and not to thick screw down 10 mm ply at 150mm centres. seal ply with pva sealer prior too tilling. If it is a concrete floor it is best to lift vinyl.


How many yards of concrete for 24ft 60ftx4inches thick?

You will need 17.8 cubic yards of concrete.


What is a nuclear reactor is surrounded by?

thick steel and concrete


At what depth should the reinforcing be placed in a concrete garage floor supported by a concrete wall on all four sides and poured on compacted fill?

Steel re-inforcing in concrete should always be placed 1/3 of the depth from the bottom. A 6" thick slab would have the steel placed 2" off the bottom.