0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How does an increase in the load force affect the efficiency of a pulley system?
it might be to heavy for the wheel to handle and it break as the rope
Why would you use a single fixed pulley to lift a box if the pulley's mechanical advantage is 1?
Because it's more convenient. The pulley in this case is not giving a mechanical advantage, but it is allowing you to locate the motive force somewhere other than directly above the box, which can be significant in that you can, for instance, tie the other end of the rope to a horse or a car on the ground, whereas it might be difficult to persuade either of those things to climb a ladder. Even without that, using a pulley allows you to use your own weight to help lift the box. To lift it from above with a rope, you'd actually have to pull up on the rope. To lift it from below with a pulley and rope, you might just be able to hold onto the rope and relax your legs, letting gravity do some of the work for you.
Why might you want use a single fixed pulley?
if you use a double fixed pully, it could make the rope or wire haver that much more preasure
What can a pulley do?
its not to push or pull an object its a simple machine made from a grooved wheel with a rope or cable wrapped around the groove.
Why might there be discrepancies between the measured values of different blocks?
the blocks might not be the same size.
What causes a pulley to wobble?
Things that might cause a pulley to wobble: The pulley is bent. The shaft the pulley is on is bent. The pulley is mounted crooked.
Can you bolt a 4.7 Dodge Durango tranny to a 5.2 liter engine?
It might bolt up, but would never shift due to the completely different control systems (computers and electrical plugs).It might bolt up, but would never shift due to the completely different control systems (computers and electrical plugs).
How do you change a pulley on a 92 Pontiac Grand Am?
you will need a pulley puller, pull off the pulley when you replace just bolt it back in place it might take a little muscle to get it started.
What might be prehistoric mans vision of the ideal woman and ideal man using the work of the cave of chauvet port d arc?
Lascaux using these works of art speculate on the vision that What might be prehistoric mans vision of the ideal woman and ideal man
Where might one find reviews for fire sprinkler systems?
Reviews for fire sprinkler systems can be found from the Fire Protection Agency and from the Fire Industry Association. These give their own independent reviews of how good the different systems are.
What parts might make a pulley?
A wheel, a groove and a rope/chain.
Why might you use a single fixed pulley?
To change the direction of pull.
Squeal from a pully from under the hood when motor is running on a C5 corvette?
if there isn't anything wrong with the belt the pulley is turning, check to see if the pulley is stuck, you might need to replace the pulley ( about $30 )
How do you take a supercharger pulley out?
This all depends on what type of supercharger it is. If you have an Eaton supercharger it is possible that it might be a pressed on pulley. If this is the case then you will need a pulley puller. If the supercharger is a Vortech, Paxton, or ProCharger they all use key ways. So all you need to do is take the bolt off and the pulley might come off. Some times the pulley will not slide off so a pulley puller will work. Or you can heat up the shaft which will cause the pulley to expand and it will then slide right off. DO NOT use a screw driver or any force to pry it off. This can cause damage to the bearings.
What are the advantages and disadvantages of cast iron pulley?
It is heavy and might damage bearings
How do you remove the pulley on the power steering pump on a Ford Windstar?
You need a special pulley removal tool. And you will also need a special tool to reinstall the pulley. You might be able to buy one at your local parts store.
How might Byzantine art reflect the ideal of Theosis?
k90i9
