It's 1/4 cup Barbicide to a quart of water...so, five cups in 20 quarts.
This will depend upon the specific disinfection solution being used. In general, the hotter or stronger the solution, the less time a comb has to be immersed. Each disinfection solution purchased will have conditions of use listed on the label and the immersion time needed to control target pathogens will be listed there.
If you replaced transmission filter 3 1/2 quarts usually does it. You really should invest in the transmission dipstick. Proper fluid level is essential for proper funtion . If you also drained torque converter you definitely need a dipstick.
System Restore
It should take 5 quarts including filter.
2.2CL 4.5 quarts 3.0CL 4.6 quarts
if there is 4 quarts in one gallon then there should be 24 quarts in 6 gallons6 gallons = 24 quarts
4 quarts
About five quarts should do it.
it should be 4 to 5 quarts
That should be 6 quarts with the filter change. That should be 6 quarts with the filter change.
8 quarts
So long as there is no problem with the water balance and disinfection of the water there should be no reason not to swim in it.