A DVI to RCA cable can cost anywhere from $4.50 to $7.99. One can purchase this cable at most home electronics stores such as Future Shop or Best Buy.
Look at what output port you have. It could be DVI, Mini DVI, Micro DVI, or other. The Apple store website should help you decide. Then decide what connection to the TV you want. For RCA cables (like a playstation uses), Svideo or others, though those are the most common. I use a Mini-DVI (from my white apple Macbook, though the new aluminum ones are MicroDVI) to RCA connector, then plug an RCA cable from the connector to my TV. This only handles the video. Sound is seperate, I use a cable that plugs into my headphones jack and outputs RCA. It may be a good idea to talk to someone at your local apple store.
Composite RCA will be better than a coaxial cable (RG6). The order of quality and maximum resolution from best to worst is: HDMI (including HDMI 1.4 3D) DVI Component Video S-Video Composite Coaxial cable
Composite and Component cables use an RCA connector and a sheilded cable. Other cables that might be used include S-Video (not common these days), HDMI, DVI and (in Europe) SCART.
Change the audio input selection on the Pioneer from Auto to Analog. The auto mode expects the audio to come from the HDMI port when it is plugged in.
1.for video composite cable yellow use rca male to rca male video cable. or component (recommended if tv has this input) 3 pairs of rca male to rca male video called rgb cable. 2. for audio out use pair of rca male to rca male cable.
There are several options to connect an HD tv to your source.HDMI cables can be expensive,avoid Best Buy like the plague as they shamelessly overcharge.Component vieo cables are also an option,these are easily mistaken for rca jacks so make sure the connectors are red,green and blue(RGB).If you have a dvi-d cable it works,but it's not really advantageous.
No. You would need a coaxial (preferably video) cable to connect a cable box to a VCR, unless your cable box has RCA outputs, which most don't.
Simple cables for component video, composite video, analog audio and coaxial digial audio can be made with shielded cable and RCA connectors. Solder the inner connector to the middle pin and the sheild to the outer surround. Note that you will need different wire for the component video and digital audio. DVI, S-Video, HDMI and DisplayPort connectors are too complicated for the average user to make at home, and are best left to robots.
You just need a long cable like the Comprehensive 3 RCA to 3 RCA HR Pro Cable - 35 ft.
An RCA cable with composite video is better than standard definition cable. An RCA cable set (3 cables) can also carry a component video signal, which can be Hugh definition up to 1080p. Cable television can also carry a high definition signal if you have a HD cable box or a TV with a digital tuner. For connecting a VCR, an RCA composite video cable will give a better picture than the RF antenna cable.
a mini (1/8") cable can be a y-cable, particularly if it is used to connect a 1/8" stereo connector (like an iPod) to a RCA stereo cable. The 1/8" stereo plug must split (Y) to the left and right RCA in order to connect in stereo.
Typical coax cable uses a different standard than RCA. You will need to use a converter box.