0
How much current will a 15 hp single phase 220 volt fan motor draw?
Wiki User
∙ 9y ago
The wiring should allow for 115 amps.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Why motor burn at single phasing?
A 3-phase motor will not run on single-phase power or if one of the three phases is disconnected. If the motor is not running, there is no back-EMF generated in the coils, and they draw excessive current, thus overheating.
How does the 3-phase induction motor acts like 2-phase induction motor if a phase is disconnected from supply?
yes the motor will run but will draw more current and the torque will be not constant means not smooth due to unbalanced current
Will a 10 hp 220 volt motor draw large amounts of electricity?
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
How do you wire 3 phase power to 1 phase power diagram?
In an emergency and for a short period of time you can single phase a three phase motor but the motor will be loud, have terrible power characteristics and depending upon the use will burn up rather quickly. You should never try to run this in other than a life threatening emergency situation, the motors are not designed for it. Normally you don't. <<>> A three phase motor will not start on single phase. If the motor was started on three phase and loses a phase, it will stay running at a lower percentage of efficiency. Now a days the motor protection will not let a three phase motor run in a single phasing condition. All three phase legs of the motor are monitored and in a single phase condition the other two legs of the motor draw a higher current. This higher current is sensed by the motor's overload heaters in the motor's contactor and take the motor off line by opening the motor contactor. Now to the question, any two legs of a three phase system in electrical terms is known as single phase. As long as the three phase voltage matches the voltage needed in the single phase power diagram it can be connected to operate single phase equipment.
Can a 3 phase motor be converted into a single phase motor?
A three-phase motor will not start if one or two phases aren't connected. If while running one or two phases "drop out", it will continue to run for awhile, but will eventually burn out, unless connected to a motor saver.
What would be the horse power required in a 3-phase motor to replace a .5 horsepower single phase motor.?
You still need the same horsepower. The advantage of the three-phase motor is that it will draw lower current.
Why motor burn at single phasing?
A 3-phase motor will not run on single-phase power or if one of the three phases is disconnected. If the motor is not running, there is no back-EMF generated in the coils, and they draw excessive current, thus overheating.
How much current will a 5 HP single phase 220 volt motor draw?
P=VI P=power V=voltage I=current therefore current drawn is 5000/400=50/4=12.5 amperes
How does the 3-phase induction motor acts like 2-phase induction motor if a phase is disconnected from supply?
yes the motor will run but will draw more current and the torque will be not constant means not smooth due to unbalanced current
What is the phase current of a three phase 2.2kw 415v motor connected in star?
The line current would be the same if the motor were connected in delta. The current can be based on the rule of thumb which says 7 amps must be allowed for a 1-HP single-phase motor on 240 v. A 2.2 kW motor is three times as powerful, and on a three-phase supply of the same voltage (240/415) it would draw 7 amps.
Will a 10 hp 220 volt motor draw large amounts of electricity?
A single phase 10 HP motor will draw aproximately 50 amps. A three phase 10 HP motor will draw aproximately 28 amps.
How many watts is 1 hp at 480volts?
A 1-HP motor is reckoned to draw 7 amps at 240 v single-phase. The same power of motor would draw 3.5 amps at 480 v single-phase, but a 480 v supply could most likely be a three-phase suppy, and the current in that case would be reckoned as 2 amps.
How do you wire 3 phase power to 1 phase power diagram?
In an emergency and for a short period of time you can single phase a three phase motor but the motor will be loud, have terrible power characteristics and depending upon the use will burn up rather quickly. You should never try to run this in other than a life threatening emergency situation, the motors are not designed for it. Normally you don't. <<>> A three phase motor will not start on single phase. If the motor was started on three phase and loses a phase, it will stay running at a lower percentage of efficiency. Now a days the motor protection will not let a three phase motor run in a single phasing condition. All three phase legs of the motor are monitored and in a single phase condition the other two legs of the motor draw a higher current. This higher current is sensed by the motor's overload heaters in the motor's contactor and take the motor off line by opening the motor contactor. Now to the question, any two legs of a three phase system in electrical terms is known as single phase. As long as the three phase voltage matches the voltage needed in the single phase power diagram it can be connected to operate single phase equipment.
Can a 3 phase motor be converted into a single phase motor?
A three-phase motor will not start if one or two phases aren't connected. If while running one or two phases "drop out", it will continue to run for awhile, but will eventually burn out, unless connected to a motor saver.
Should all 3 phases of a motor draw the same amperage?
Yes. they should. The windings in a three phase motor are identical, and provided they are fed with a supply that has the phases at the correct voltage, and at the correct 'phase angles' to each-other, they should each draw the same current from each supply line. (Motor windings are a 'balanced' load - they will all draw the same current from the lines if the supply is okay and the windings are connected correctly, and have no shorts or opens in them.) Some three phase motors can be connected to run off of a single phase line, using capacitors to give phase shifts to simulate 3 phase. This is an 'unbalanced' 3 phase supply as far as the motor is concerned, and while it WILL work, the motor will develop less staring torque, less full load power, and more noise - and it WILL draw different currents in each 'phase' while running.
What is current draw on a 220v single phase 1.5hp pump with 80gpm and 30ft tdh?
5amps
Can you wire a 3 phase 690 volt delta star motor to 480 volt 3 phase with out harming the motor?
Depends on the motor and the load on that motor. If the motor is loaded to its capacity, it will draw the same amount of power as it would on 690 volts - which will result in ( 690/480 = ) 144% of normal current, which will thermally damage the motor, or will trip overload protection.
