0
What else can I help you with?
Whats the difference between a stereo receiver and a channel stereo receiver?
They're both the same. A "channel" stereo receiver merely accepts a given number of channels (2,4,5, &tc.). A stereo receiver has 2 channels of audio output, left and right. A receiver marked as ___ channel receiver has the corresponding number of channels. For instance a 5 channel stereo receiver can play 5 different channels of audio through 5 speakers. If the receiver has a decimal, such as 5.1 or 7.1, that indicates that it has 5 or 7 channels of regular audio, plus 1 channel for subwoofer, making them 6 and 8 channels, respectively.
What kind of receiver will allow you to play a mono hi-fi speaker from the 1950's when present receivers are formatted for stereo?
Any stereo amplifier these days can connect to a speaker from the 1950's. You will just have to connect one side, left or right, to the speaker. You won't get stereo. If your receiver has the option, you should select mono output to combine the signal of both channels. Never connect the left and right speaker leads together to one speaker.
How do you connect laptop to 5.1 stereo system?
Connect Laptop to Stereo with a Y cable from the headphone jack of the laptop to the red and white plugs on the back of the stereo system.· Purchase a 1/8 inch (3.5 mm) mini-jack to RCA cable. It looks like a "Y." This cable will allow you to use the single output jack on your laptop to connect to the left and right inputs on your stereo receiver.· Plug the single-end mini-jack into the headphone or speaker output jack on your laptop.· Plug the two RCA ends into your stereo receiver input jacks. Use an input such as "Aux." The cable should be color-coded (red and white) for easy matching with the right and left input jacks.· Change the receiver to the input mode that you used (i.e. "Aux").· Select files on your laptop and play. You're now ready to enjoy MP3s from your laptop on your stereo system.
What is reverse stereo?
Reverse stereo is the swap of the left and right channels.
What does st on a Panasonic stereo mean?
st means stereo pan position stereo left n right =st
Is there a way I could convert my receiver's AUX inputs to 5.1 Audio?
Auxiliary inputs to a receiver are always stereo. If you have a 5-channel analog signal (from a computer or other multi-channel device), you will need a receiver with a 5.1 analog input. This has 5 separate RCA inputs for left, right, center, sub, and the two surround speakers.An analog output from a VHS-Hi Fi VCR or the analog outputs of a DVD player can be input into the stereo aux inputs of a receiver and decoded to Dolby Surround, but this format is actually only 3 discrete channels, left, right, and surround. It has no separate information for the sub or the center channel, and has a limited bandwidth on the surround channel.So, the answer is NO.Read more: Is_there_a_way_you_can_add_5.1_audio_to_Auxiliary_Inputs
Is there a way you can add 5.1 audio to Auxiliary Inputs?
Auxiliary inputs to a receiver are always stereo. If you have a 5-channel analog signal (from a computer or other multi-channel device), you will need a receiver with a 5.1 analog input. This has 5 separate RCA inputs for left, right, center, sub, and the two surround speakers. An analog output from a VHS-Hi Fi VCR can be input into the stereo aux inputs of a receiver and decoded to Dolby Surround, but this format is actually only 3 discrete channels, left, right, and surround. It has no separate information for the sub or the center channel, and has a limited bandwidth on the surround channel.
How do you connect one speaker to the Right and Left outputs of a stereo amplifier?
To connect one speaker to the right and left outputs of a stereo amplifier, split the input into two parts. These should go to the left and right signals. The input of the amps should be a stereo input.
What are the advantages FMstereo signal over monaural signal in communication system?
The advantage of an FM stereo signal over a monaural signal in communication systems is that you can transmit and receive two channels of information at the same time. Typically, this is the left and right audio signal, and it allows the listener to perceive spatial aspects of the original performance. This is done by sending left+right over the base modulation range. A monaural receiver will then play left+right over one speaker, making it compatible with older receivers. Then, to get the second channel, we send left-right over a secondary modulated carrier of 38kHz, riding on top of the original modulation. The receiver decodes that by adding and subtracting. In one case, left+right plus left-right gives 2 times left, and left+right minus left-right gives 2 times right. There is also a 19kHz pilot tone included, which a receiver can detect and use to enable the decoder. This will help the receiver not attempt to decode when there is a weak signal.
1994 s420 Stereo Amp location?
in the trunk, left side, underneath the speaker, to the left
Where do you install the bolt catch on an AR15?
Into the left side of the receiver.
What is wrong if your DVD player will play background music but not the actors' voices and can you find repair instructions on the Internet?
It's could be because the DVD player is set to play 5.1 surround but you do not have a surround system. Go to your DVD's audio setting and change it from 5.1 to normal stereo. The problem is most likely in your surround receiver. As most DVD player's don't have surround output anymore, your receiver is where you set your speaker configuration. If you don't have a center channel speaker (the one above or below the screen), you must set your receiver to mix the dialogue of the movie to the left and right speakers. How you do this is described in the manual for your surround receiver. When playing back movies, you should select the stereo 2-channel mix from the options or setup screen.
