First you need to repair the problem or the light will just come back on. The charge varies greatly from place to place. Try disconnecting the battery for 1 hour which works on some vehicles.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Repairing the fault which is causing the check engine light is the recommended way to go about doing this.
i just changed my batterys out on my truck now my check engine light is on?
usee a rubber :)
take it to Auto Zone they have a code reader which will erase the code for the check engine light they do it freeAnswertake it to Auto Zone they have a code reader which will erase the code for the check engine light they do it free They won't clear it for you not allowed but you can get the code reader from them as rent a tool clear the code yourself and bring back and get money back from rent a toolAs an employee of Autozone, we are not permitted to erase codes. this is company policy. If any employee is erasing codes they are subject to termination if caught.
As with any check engine light in an OBDII Vehicle (1996 and newer), use an OBDII scanner to FIRST read your codes and find out why it was on in the first place, then SECOND erase the code using the erase command on the scanner. If you don't fix the problem that caused the light to come on in the first place, it will always return.
if it's 96 & newer.. you will need an OBD2 scan tool to erase the codes that turn the light on.
Did you reset the Check Engine light? If not, reset by disconnecting the negative battery cable for a couple of minutes. This will erase the computer. Reconnect the battery cable and if everything is OK, the Check Engine light should be off.
To reset the check engine light on a 1994 Honda Civic locate the fuse box in the engine compartment. Find the ECU fuse and pull it off for at least 5 seconds. This will erase all codes on the ECU.
on 96 and newr you have to have a code scanner to erase codes.try disconnecting positive cable from battery and leave off for 30 seconds to see if this works!!!reset radio.if that will not work, go to auto-zone they have a scanner to erase codes,free of charge.
You can unhook the battery or use a scan tool to erase the code. If the cause is not repaired, the light will return.
By paying to hooking up an OBD2 scanner. It will display the codes fix problem erase codes and if is fixed light is gone