25 kg/m2 is a density of a toughened glass with 10 mm thick. If you want convert that measure into kN, then multiply by the factor "g" that is gravity (9.81 m/s2) and you get 25 x 9.81 = 245.25 kN/m2.
The deca Newton meter of torque is 0.1 to one Newton meter. In relation to the kilo meter of torque, it is .001. Many converters are available online for torque measurements.
joule seconds or newton meter seconds depending on what system you use
Pa is the metric unit for pressure, Pascal. It is one Newton per square meter. Atmospheric pressure is approximately 101 kPa (101 000 Pa), which is 14.7 psi (pounds per square inch) in Imperial units. The air pressure in car tires is usually about twice that (32 psi, 220 kPa).
Water has a density of 1 gram per cubic centimeter. There are 1,000,000 cubic centimeters in a cubic meter, so 1 cubic meter has a mass of 1000 kilograms.
Assuming the 10mm bars are arranged in a perfect square pattern, the number of bars at 10mm spacing in 1 square meter would be 1000 bars. This is calculated by dividing the total area (1000 square centimeters) by the area taken up by each bar (1 square centimeter).
47kg
10Kilo
It depends on the glass type, but for general purposes it is about 19.8 kilograms per square meter
6mm glass weighs 16 kg/m2 or 3.27 lbs per square foot
6mm glass weighs 1.5Og/cm2. therefore 15Kg / m2
A newton per square meter is called a pascal. It is the same as 1/100,000 bar.
newton meter square is not the unit of volume so cant be converted in cm3
1 Pascal of pressure = 1 newton of force on 1 square meter of area1 kilopascal = 1,000 newtons of force on 1 square meter, or 1 newton of force on 0.001 square meter, etc.
You can't, as they are used to measure two different quantities. The newton metre is used to measure torque, and the newton per square metre (which is actually called a pascal) is used to measure pressure.
1 poise = 0.1 newton second per meter squared
pascal or newton/meter square
One pascal, a unit of pressure equivalent to one newton per square meter