Depends on the product volume and product mix you want. You have manual presses and full automatic pick and place machines for press-fit connecters.
You have presses with force/distance monitoring and lots of options are usually available.
a decent manual press starts from 5000 euro.
a flexible semi-automatic machine with a good quality control system starts from 40 000 euro
FCI connectors used to be markt leader with the semi and full automatic machine. However the tooling department has split and has become föhrenbach application tooling. www.foehrenbach.be
If you want a good machine that does not cost too much, I would recommend smoothfitness.com. Other than that their are company's sites for them such as Bowflex.
they are a machine fit. they must be pressed in and out with a hydraulic press, any machine shop should be able to do it.
the wheel bearings are press fit bearings you need to pull out the drums and take them and the new bearings to a machine shop they can press them in a few minutes and fairly cheep to do
how much fit fashion classes cost
It cost me about 300$ CAN
The column holds the machine head and transmission at the top and allows the table to be raised to fit the work being drilled.
How much does it cost to fit timing chain on a mini cooper
50pound
Nuts and bolts, machine screws, sheet metal screws, weld, press fit, but mostly nuts and bolts.
Maximum sheet size on an ABDick 8815 is 13 x 18, so the paper would have to be very small to fit on that press. This machine is for printing forms.
about 80 euros
You have to replace the front hub. The bearing is press-fit into the hub, and you cannot order it separately. Several hundred dollars for the part, plus labor.