Want this question answered?
8 dollars
To bleed the brakes on a 2000 Toyota Tundra, first pump the brakes, then loosen the drain plug on the master cylinder and pump another 3 to 6 times. Tighten the plug and add brake fluid.
When refilling brake fluid it is important to use the correct type of fluid for the car. For a 1995 Toyota Corolla the correct fluid is brake fluid dot 3 or brake fluid dot 4.
Where is the brake fluid filler located on a 2004 Toyota Corolla?
A Toyota Camry built in 1998 takes DOT 3 brake fluid. This is the standard brake fluid for passenger cars.
normal brake fluid
how to replace brake fluid on a 1999 Toyota 4runner
The best answer is to ask your local Toyota dealer. The alternative answer would be to screw the cap off your tank in the engine bay that says brake fluid. The fluid on the stick should be a clear light brown. When you touch it the fluid should not be slippery, greasy, or discolored. If there is any sediment in there then change it right away and make sure to clean out the fluid reservoir. Also change your brake fluid every two years and flush out the brake lines for superior maintenance.
YOU can't! DO not use anything else but Yoda WS ATF.
DOT 3
The fluid in the clutch master cylinder is brake fluid. Use DOT 3 or similar brake fluid for fluid replacement.
You do not need to change it at all, unless you have replaced some long brake lines. Just make sure that the level of the fluid is proper.