answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered
2012-03-09 16:19:31
2012-03-09 16:19:31

how much does it cost to replace to egr valve on the 2002 Mazda protege

123
๐Ÿฆƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


It can be a little expensive to replace the EGR valve on the 1987 Volvo 240 DL. The job takes about 1 to 3 hours and can cost as much as about 240 dollars.


An EGR valve usually can't be cleaned. If you want to try to clean it, us Combustion Chamber Cleaner on it. If this doesn't work then the cost of an EGR Valve from the dealer is about $275.00 Can. I have had to replace my EGR valve about 2 months ago and I wasn't able to find an after market replacement.


The cost of replacing an EGR valve varies with the make, model and location of the car. An EGR valve for a 1996 Lincoln Town Car is about $160.


Usually you replace the egr valve.


The EGR Valve its self is around 77 dollars and the gasket is about 2.50 so if you do it yourself it will be 79.50 taking it in could cost 100+


How do you replace the EGR Valve on a 2001 Ford Escape?


location of egr valve on 04 grand am v6


You unscrew the bolts.



The cost of the EGR valve ranges, depending on where the part is bought from. It can cost anywhere from $58 to $100.


Remove the wiring harness from your 2000 Dodge Stratus EGR valve. Remove the EGR valve retaining screws. Reverse the process to install the new EGR valve.


That's your EGR valve flow is insufficient. Replace the EGR valve.


A 1998 Dodge Ram does not have EGR.



ive seen it as much as $300 which is crazy but got to get it done




An aftermarket EGR valve will cost anywhere in the range of $80-110, depending on the brand. The EGR valve differs depending on the engine size (4 cyl or V6), but the price range is about the same.


http://thecommi.angelfire.com/index.html I have included a picture of the EGR valve on my website. scroll down and click on EGR valve. the valve is easy to replace. remove the wireing connector from the top, remove the two 10mm mounting bolts from its base. pull strait up and off. should take under 10 min to replace. http://thecommi.angelfire.com/index.html I have included a picture of the EGR valve on my website. scroll down and click on EGR valve. the valve is easy to replace. remove the wireing connector from the top, remove the two 10mm mounting bolts from its base. pull strait up and off. should take under 10 min to replace.



the code # 32 is telling you that it`s a exhaust gas recirculation error. your electronic vacuum regulator valve controls EGR vacuum. what needed to be done is replace your EGR valve . the cost to replace this part is based on what type your vehicle needs . choices are electronic EGR valve at about $120.00 dollars if your vehicle has fuel injection. or $70.00 dollars if your vehicle has a carburator.


I'm Trying To Change The EGR valve ON My 1999 Nissan Quest How Difficult Is It Going To Be, Please Help


Unplug the vacuum line from the EGR valve then unbolt the 2 bolts ( i believe these are Number 11 metric ) that hold the EGR Valve. Make sure to remove gasket. replace in reverse, always replace the gasket. Plug Vacuum line back into the EGR Valve. This should take 10-15 minutes


Remove the vacuum hose from the EGR valve. Pull the valve out of the air cleaner housing. Reverse the process to install the new valve.


The EGR valve is located at the front of the h22a4 engine. The EGR valve is right beside of the front of the EGR valve.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.