An EGR valve usually can't be cleaned. If you want to try to clean it, us Combustion Chamber Cleaner on it. If this doesn't work then the cost of an EGR Valve from the dealer is about $275.00 Can. I have had to replace my EGR valve about 2 months ago and I wasn't able to find an after market replacement.
Change the coils they should be two black blocks on top of the engine..the coils could have gone bad.
does a 1997 1.5l maxda protege have a timing belt or timing chain. When should i change it.
.044
Every 90,000 miles per Mazda
follow the bottom radiator hose up to the engine and remove the two bolts an you should see it
When they are broken.
A hamster cage should be cleaned weekly.
First both the vehicle and engine will need to be lifted and supported. The engine oil pans will need to unbolted, with care not to strip the heads or block. Once the pan is off, the engine block should be cleaned of any residual gasket material. The oil pan should be run through a parts a cleaner. Reinstallation will require a new gasket and possibly sealer. Bolts should not be over torqued during install. The vehicle can then be filled with fresh oil and a new oil filter. Start the vehicle to check for leaks.
TOTALLY DIFFERENT TRANSMISSIONS AND ENGINE TO BOLT TO.
A horses stall should be cleaned every day.
This job is of skilled to moderate difficulty. It will require the vehicle to be safely lifted and the engine to be supported. Once lifted and the engine supported the two engine mounts can be unbolted. It would help to have an air wrench due to the torque involved. There should be two bolts retaining each mount. Once removed the mounting surfaces should be cleaned and degreased. The new mounts can then be replaced.
There is no point in changing it.