No and yes. A 120-volt plug-in timer connects the line voltage to the timer and to the switch that is operated by the timer, so you can't use it directly for a 12-volt light.However, if you use the timer to supply power to a step-down transformer, you can run a 12-volt light off the transformer (that's how most low-voltage landscape lighting timers work). If you don't need much current, you could even plug a 12-volt AC adapter "wall wart" into the timer. Otherwise, you would have to open the timer and modify it so that the micro switch is completely isolated from the 120-volt supply and bring it out to connectors for a 12-volt supply. Make sure you know what you're doing and also don't exceed the current capacity of the switch.
It costs about $22 a year, or about $2 a month. It really depends on how much you run it.
$40.00 a year
The clock timer on your immersion heater is for you to program the heater to run at certain temperatures at certain times. You can contact your utility company and ask what the off peak or low demand hours are. Those times it is less costly to run your heater.
It depends on your location.
I have finished Big Nate and no the timer does not run out
No and yes. A 120-volt plug-in timer connects the line voltage to the timer and to the switch that is operated by the timer, so you can't use it directly for a 12-volt light.However, if you use the timer to supply power to a step-down transformer, you can run a 12-volt light off the transformer (that's how most low-voltage landscape lighting timers work). If you don't need much current, you could even plug a 12-volt AC adapter "wall wart" into the timer. Otherwise, you would have to open the timer and modify it so that the micro switch is completely isolated from the 120-volt supply and bring it out to connectors for a 12-volt supply. Make sure you know what you're doing and also don't exceed the current capacity of the switch.
it cost 50$
if defrost timer not working properly, refrigerator will be in continuous run.
If the timer is not on then how can the pump turn off? The timer should have to be on for the pump to run in the first place. Can you ask the question in a different manner? Ken
a lot
Millions
2000$
0.00
A small air conditioner comes in many forms. The ones you install into the wall like mitsubishi electric ones run in the hundereds and into the thousands. Now stationary and portables run at $300 and less.
$30-40, depending when you register.
The timer has to be multi-pole. The ballast must be connected to the load contacts of the timer. If the timer is a 120 Volt timer, the timer has to run on a 120V. circuit. Loads are loads, and as long as you have a multi-load timer you can hook up whatever you want. If the timer only works on a shared power source (load shares the timer supply) you will need to use a contactor on the load side or the timer.