From the manual... drain oil. On right side engine case there is a screw just in front of the drive sprocket. Remove the screw. Add oil through oil filler hole on left side engine case until oil starts to run out of the hole on the right side. Done. Should take about .6 of a quart of oil.
depending on overall condition between 600 to 1500 dollars
the 1978 Pa50 II shop manual says to put 70cc
60ml
Depends the shape, totally restored 1200, ok would be 600, and junky 300 and just in horribe shape id sell it for what its worth in scrap metal.
about a liter
what type of oil should i use in a 1991 Honda cr 80
4.4 oz of sae 80
2005 CR250R dry weight is 213.0 lbs
It has a check screw on the right side of the engine...forward of the clutch cover. Its easy to spot because it has a copper washer. Remove the 8mm bolt and fill the crank case till oil comes out of the bolt hole...then you know your good.
My owners manual says 140cc or 4.7 ozs.
hi there pal y dont u look in the manual it might help u
100cc (3.4 oz) at disassembly 90cc (3.0 oz) after draining hypoid gear oil SAE#80