81 but it also depends on your grout line size. I based this on no grout line. too many good, not enough bad
86 percent we need
9 square feet is a square yard.90 square feet is 10 square yards.10 square yards at 11 per square yard is 110 just for the tiles.Unless the tiles perfectly fit the area to be covered, you will need to purchase extra tiles since a number of tiles will have to be cut to fit against the wall.For a bathroom you still need to add the cost of tile adhesive, grout, and labor :)
1.75 squares.
You will need at least 14 cubic yards.
form_title= Grout Cleaner form_header= Keep your home free of mold and bacteria. How much grout do you need cleaned?*= _ [50] When was your grout last cleaned?*= _ [50] What room do you want cleaned?*= _ [50]
I recently bought my first new house. I need to clean the grout out and have no idea how. How do I clean out my grout?
You need a float brush and grout. You want to make sure you have the right kind of grout. For example, you might want a sanded grout for larger grout spaces. Apply the grout with the float at a 45 degree angle, wiping as much off as you go. After it sets, use a sponge to wipe the haze from the tiles.
no you need a grout line
You don't need to add any kind of grout to the eggshells. The grout, technically, is the painted background of the substrate or even unpainted before you add the eggshells.
5 lbs at 1/4 inch joint.
It depends upon the form configuration,aggregate voids and grout fluidity.
You should use the grout that will work best for the biggest grout space that you need. So for a grout width like you described, 1/16 to 1/2, you should use sanded grout. Unsanded grout will look terrible in a 1/2" grout joint, but sanded grout will look great in both. Use sanded.
Yes, you need to buy special grout stain. Available in many tile shops.
What is the worst grout cleaning solution out there? I Need to know which ones to avoid!
Grout sealer is a protective substance used to prevent moisture, stains, and contaminants from penetrating and damaging grout lines. It is essential for maintaining the appearance and longevity of tiled surfaces like bathroom walls, kitchen backsplashes, and floors. There are two types of grout sealers: penetration/impregnating sealers, which absorb into porous grout, and surface sealers, which create a protective layer on the surface. Grout sealers offer several benefits, including stain prevention, moisture resistance, easier cleaning, and extended lifespan. To apply grout sealer, clean the grout, choose the right sealer, ventilate the area, apply the sealer, wipe off excess sealer, and allow it to cure. Regular reapplying is recommended to maintain its effectiveness. Epoxy grouts may not require sealing, so check manufacturer recommendations.
grout removal and replacement is a hard and long project unless you already have the tools and knowledge, If you hire a tile contractor you are likely to spend anywhere from 2.50 to 3.50 a sq foot depending on the age of the grout and the thickness and width of the grout..........