Typically, for 10 lbs of grout, you would need to add approximately 1.4-1.6 gallons (5-6 liters) of water. It is important to check the specific instructions on the grout packaging as water requirements can vary.
It is about 2.2 lbs. It is 1 Kg.
5 gallons of water weighs approximately 41.7 pounds.
1 gallon of water is equal to approximately 8.34 lbs. Therefore, 35 lbs of water is roughly equivalent to 4.19 gallons.
The amount of chlorine to add to a pool depends on the current chlorine level and desired level. As a general guideline, for a 11000-gallon pool, you may need to add between 1 and 3 cups of liquid chlorine or about 6-12 chlorine tablets to maintain proper levels. It's best to use a pool water testing kit to accurately determine the right amount of chlorine needed.
A 3-gallon bucket of cement typically weighs between 40 to 100 pounds, depending on the type of cement mix being used and its water content.
90 to 140 lbs/cf depending on the mix
The coverage area of grout can vary depending on the type and application method, but a general rule of thumb is that 1 bag of grout (typically 25 lbs) covers about 100 to 200 square feet for standard tile sizes. Therefore, 9 lbs of grout would cover approximately 36 to 72 square feet, depending on the grout's thickness and the size of the joints between tiles. Always check the specific manufacturer's guidelines for more accurate coverage information.
5 lbs at 1/4 inch joint.
We suggest to start with 15 lbs of salt and then test the water. Ideal will 3400 ppm. Usually we suggest to add 290 lbs of salt for a 10,000 gallon pool if the pool does not have any chlorine. By that reference you should add 29 lbs. But we think start with 15 lbs and increase as needed is a good idea.
1000 lbs of water weighs 1000 lbs.
Around 943 lbs. Water weighs 8.33 lbs/gal. 5 inch hose holds 1 gal per 1 foot of hose. So 8.33x100 foot is 833 lbs. Add that to the 110 lbs that the hose weighs empty and you have 943 lbs
5.2 lbs
The boat is supposed to weigh 2400 lbs You will need to add 600 lbs for the trailer You will need to add fuel gear and safety equipment into the math. At a guess 3400 lbs on the trailer ready to go to the water
One US gallon of water weighs about 8.345 lbs. 1700 gallons is about 14,186.5 lbs.
A gallon of water weighs about 8.35 lbs. so 37 x 8.35 = 308.95 lbs.
To find out how much to add for 640 gallons, first determine the proportion of 640 gallons to 10,000 gallons. Since 640 gallons is 0.064 of 10,000 gallons, you multiply 4 lbs by 0.064. This results in adding approximately 0.256 lbs to the 640 gallons.
Two pounds of plain water is 16.7 gallons.