Six Hard Disk.
i have a new hard disk so what i should do ?
First , you just connect to the ethernet on your modem. Then connect your pc to the LAN on the router. Then you are good to go. If you have a disk with it , Then you must install with that disk
Hard Disk Drive (HDD) is, and should be connected to a SATA (Serial Advanced Technology Attachment) or PATA(Parallel Advanced Technology Attachment). Connecting to one of these ports will enable the motherboard, or rather the whole computer to read the hard disk drive. Also, it should be connected to one of the power supply cables to be able to power up the hard disk. Sometimes, there are attachments or enclosures that enables the hard disk to connect to a computer using USB.
You can connect them using a firewire cable and target disk mode. Turn on one of them and connect the two with the cable. Turn on the second one while holding down the "T" key for "Target Disk Mode". This will make the second one appear as an extrnal drive.
(The following assumes that the hard disk is still in working condition.) If the hard disk is in a computer, you can connect it with another computer over a network, and copy the files over the network. You can also connect the old hard disk to your new computer (using a second hard disk cable); in this case, if you manage to make it work, you can copy the files from one disk to another. In this case, the copying itself should be much faster than copying files over a network.
Hard Disk Drive (HDD) is, and should be connected to a SATA (Serial Advanced Technology Attachment) or PATA(Parallel Advanced Technology Attachment). Connecting to one of these ports will enable the motherboard, or rather the whole computer to read the hard disk drive. Also, it should be connected to one of the power supply cables to be able to power up the hard disk. Sometimes, there are attachments or enclosures that enables the hard disk to connect to a computer using USB.
Floppy Disk
how do connect two hard driver
Don't think it is possible
IBM introduced the floppy disk in 1971 to store microcode for the System/370. It was an 8 inch single density single sided disk with a capacity of 80,000 bytes.
prefer thor disk tbh
You will require a network compatible game or the Dreamcast Web Browser disk to connect to the Internet. Connect the machine to an Ethernet cable as you would a personal computer and boot the disk. Note that many online games no longer have active servers and will not allow connections.