Want this question answered?
8 x 20 kg bags at the start of Summer, and 4 x 20kg bags at the end
add acid
Not sure what too low means, But you need in an outdoor pool about 80 PPM of Stabelizer and in an indoor pool around 10 to 20 PPM. We have a new product called pool magic which each gallon adds 20PPM stabelizer per Regular cyanuric acid has a low pH and is very acidic and it can take 4 to 7 days to dissolve. This can cause damage to the pool surface or circulation system depending on the method of application. Until dissolved, dry cyanuric acid will not protect chlorine from UV loss. Natural Chemistry�s Instant Pool Water Conditioner is not an acid (it�s a salt) and has a pool friendly pH of about 8.0. Add it to the pool and an instant later it is in solution and ready to protect your chlorine.
1.569
clear
This needs to be tested with a pool salt testing device or get the water tested at the pool shop.
Yes if you add too much or add it before it can dissolve it will end up sitting on the bottom of the pool.
None until you add it.
550ml
$1.00 to $1.50 a day
Add 5 liters to the 7 liter bottle. Add 5 more to the 7 liter bottle; now you have 3 liters. Dump out the water from the 7 liter bottle. Then add the 3 liters to the 7 liter bottle. Fill the 5 liter bottle again and dump it into the 7 liter bottle. Dump out the water in the 7l bottle and add 1 liter to the 7 liter bottle. Add 5 liters to the 7 liter bottle and there you have it.
This question cannot be answered without knowing the kind of pool, the associated structures i.e pool house, cabana etc., and the location of the property.