Horse power is a rating on the motor, it has nothing to do with the transmission.
Goto www.car-parts.com and look up and engine in the list it will tell you all the cars that have that motor
5w30 weight.
The 1997 Chevrolet Cavalier motor will fit into the 1997 Pontiac sun fire. The motor mounts and the wiring harness are exactly the same.
I'm almost sure you're referring to the fan motor. It's not too complicated, but I recommend that you pick up a Haynes or Chilton manual for your car. It will have complete directions and photos.
technically yes, it will fit. Whether or not it's worth the hassle is up to you.
i have a 2001 pontiac sunfire antitheft problem will not start anttheft light flashs on dash i can turn motor over buy jump starter but will not start
The cooling system diagram for a 1996 Pontiac Sunfire can be found in its manuals. It can also be obtained as a print out at an auto part store.
The coil pack on a 2000 Pontiac Sunfire is located behind the air intake hose. Just behind where the air intake hose connects to the top of the motor is where the coil pack is on this vehicle.
on the back of the motor wright below the crank sensor
5 quarts or 4.8 liters of motor oil
The solenoid/starter motor assembly is installed on the lower part of the engine next to the transmission bellhousing
Buy a motor manual with one in it.
check Hemmings Motor News
The solenoid/starter motor assembly is installed on the lower part of the engine next to the transmission bellhousing
The solenoid/starter motor assembly is installed on the lower part of the engine next to the transmission bellhousing
Dash ground is loose.
The Blower motor should be under the dash on the passenger side. It is easily accessible and can be removed by taking out the three screws and wire harness.
Please email me a photo of where the blower motor resistor is and how to change it. Thanks, Michael. By the way I want it for a 2000 Sunfire not a Grand Am.
Does your Firebird have a Chevy or Pontiac motor in it?If it is a Pontiac motor, you will need an adapter from Summit or Jeg's.Also, it could be a different output shaft length and spline count.
your local library may have a free shop manual to peek at.. good luck Dave
under the cover in the middle of the motor. take the 4 bolts out of the cover and you'll see them down in the valley
An individual can find the tech specifications on the motor used in the Pontiac Fiero in the manual that came with the vehicle or on the Pontiac web site. There are also many auto repair manuals that can be purchased or perused at an auto parts supply store that will also have the information on the motor used in the Pontiac Fiero.
Calibracion balancines
1992 Evinrude 15 horse manual start.