Ford Taurus

How much horsepower does a 2000 ford Taurus with a v6 24 valve dohc have?

789

Top Answer
User Avatar
Wiki User
Answered
2012-02-21 14:03:10
2012-02-21 14:03:10

( 200 horsepower ) at 5650 RPM and 200 lb/ft torque at 4400 RPM according to

my Consumer Guide book

001
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Related Questions


It is located underneath the throttle body.



2000 SEwhat year do you have, and do you have a 3.0 liter 12 valve engine, or a 3.0 liter 24 valve DOHC engine?12 valve


in the tank, same unit as the fuel pump, it is a bad design


200 horsepower for the 3.0 L - DOHC - V6 ( Duratec ) engine


On a 1996 Ford Taurus : The 3.0 liter " Vulcan " V6 engine is rated at ( 145 horsepower ) The 3.0 liter " Duratec " DOHC , V6 engine is rated at ( 200 horsepower )


140 horsepower from the 2.2L DOHC 16 valve Ecotec 4 banger.


Valve to piston, no. Valve to valve, yes.


The 2.0 L - DOHC - 4 cylinder engine is rated at 140 horsepower


For a 2001 Ford Taurus : The 3.0 liter " Vulcan " V6 engine is rated at ( 155 horsepower ) The 3.0 liter " Duratec " V6 engine , which is a DOHC , is rated at ( 200 horsepower ) According to my Consumer Guide book


The 3.0 liter " Vulcan " V6 engine is an Over Head Valve ( OHV ) pushrod design The 3.0 liter " Duratec " V6 engine is a Dual Over Head Cam ( DOHC ) design


You're right - not always!For example, as per the "Related Question" below, the pcv valve on a 3.0 DOHC is down below the egr / upper intake manifold area.From the "Related Question" for the DOHC pcv valve, there are links to a variety of the model years and engine combinations covering a large number of Taurus / Sables.


do you have the 3.0 V6 12 valve engine, or the 3.0 V6 24 valve DOHC engine? 3.0 v6 12 valve


In a 2000 Ford Taurus , the 3.0 liter " Duratec " DOHC - V6 has the Coil On Plug ( C.O.P. ) ignition system . So there are ( 6 coil packs )


Taurus uses chains. If it is a 3.0 liter 12 valve engine, it has one chain. If it is the 3.0 DOHC 24 valve engine, it has two chains.


ther always next to and wired in to the egr valve on intake manifold


According to the 2000 Ford Taurus Owner Guide : For the 3.0 L , DOHC , " Duratec " V6 engine : With engine oil filter change : ( 5.2 litres / 5.5 U.S. quarts )


The 2000 Ford Cobra R has 385 horsepower 5.4L (330-CI) DOHC V-8


The 3.0 liter " Duratec " engine is a DOHC design The 3.0 liter " Vulcan " engine is an over head valve ( OHV ) design


Autozone as of late 2009:12 valve Vulcan engine: $30-4524 valve Duratec/DOHC: $65See "Related Questions" below for more


I think it is printed on the side of the ignition coil. That's where it was on my 2000 Taurus 3.0 FFV.



if it is a dohc engine then you may have to remove the intake manifold


The 2000 Ford Taurus had 3 different engines available :The 3.0 liter " Vulcan " and the 3.0 liter " Vulcan " flex fuel version , they are both over head valve / pushrod design enginesThen there was the 3.0 liter " Duratec " which is a DOHC design


In a 2000 Ford Taurus with the 3.0 liter " Duratec " DOHC , V6 engine : firewall 1-----2-----3 4-----5-----6 front of vehicle



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.