Multiply psi by 0.006894759086775369 to convert from psi to MPa. ex: 1000 psi = 1000 x 0.006894759086775369 = 6.89 MPa http://www.chapelsteel.com/psi-mpai.html
bar x 14.503773773 = psi 1.5 bar x 14.503773773 = 21.76 psi (rounded)
about 2350 psi or 16.2 MPa
I think you mean how much is MegaPascal in kg/m2 (not kgm3) Answer : 1 MP = 101971.6 kg/m2
You will need some other measurements to make it possible, since those are two different units of measurement. mph (or Miles Per Hour) is a measurement of speed, whereas psi (or Pounds Per square Inch) is a measurement of pressure. There is no direct conversion between them, however, if you know the volume of flow and the area it has to flow through, it should be possible to calculate. For example: A leaf blower rated at 450 cfm @ 250 mph when blowing through a 4 inch diameter pipe will produce "x" psi. So you need the flow rate and diameter to finish the conversion.
1 psi = 6.89476 kPa (rounded) 1 kPa = 0.14504 psi (rounded) 1 mPa = 1,000 kPa
1 psi = 64984.65 Pa Therefore 50 MPa = 769 Psi
1 MPa = 145.038 PSI.
300 mpa
Multiply psi by 0.006894759086775369 to convert from psi to MPa. ex: 1000 psi = 1000 x 0.006894759086775369 = 6.89 MPa http://www.chapelsteel.com/psi-mpai.html
bar x 14.503773773 = psi 1.5 bar x 14.503773773 = 21.76 psi (rounded)
about 2350 psi or 16.2 MPa
It is 217.556607 pounds per square inch.
MPa stands for Megapascal, a unit of pressure. 1 Mpa is equal to 145.0377 psi
MPa x 145 = psi
Commercial grade Titanium (92% pure) is 63,000 psi (434 MPa). Certain titanium alloys (e.g., Beta C) achieve tensile strengths of over 200,000 psi (1,400 MPa). Megapascal or MPa is a unit to measure tensile strength.
1 psi = 0.00689475728 MPaAs such the average strength in PSI = (4620 + 4580 + 4400 + 4460 + 4200) / 5= 4452 psiAverage strength in MPa = 4452 x 0.00689475728= 30.69545941056 MPa= 30.7 MPa