Want this question answered?
Open the keyless remote and you will see the battery take it out and replace it with the same size.
how do you program a keyless entry remote to a 2000 Pontiac grandprix programyourremote.com (program your remote.com)
I had the same problem. Google "keyless entry remote 2003 Jeep Grand Cherokee".
You have to program it with a DRB (Scan tool).
dealer has to do it with factory scan tool
Insert something thin and hard, such as a pocket knife blade, in between the remote halves. After this, simply pull the halves apart and replace the old battery with the new. Snap the remote back together.
go to http://www.programyourremote.com/ they have programs for many makes and models
The receiver is behind the left side of the IP, behind the driver info center
Two years ago, I replaced two transmitters plus programming . Cost 198 bucks. This was on my 97 GT. Good luck. JK I got a key and remote from e-bay for $50, programmed the key and remote myself.
Ou812
YOU CAN FINE ALMOST ANY KEYLESS ENTRY ON EBAY AND FOR A GOOD PRICE.. GOOD LUCK.........
Stand outside your car holding the remote up against the Driver side window. Hold the Lock and Unlock buttom simultaneously on your remote while pointing your remote at the steering wheel. After about 30 sec. you will hear your horn beep. Your remote has been re-set and should now work.