Want this question answered?
its under the brake master cylinder
How bleeding brake .01 chevy venture. Master cylinder replace
Under the hood, drivers side, on the firewall.
In the master cylinder, driver side under the hood.In the master cylinder, driver side under the hood.
If when you are stopped for a light, the brake pedal just slowly goes down, it is time to replace the m/cylinder.Or if it is leaking.
Look behind master cylinder, it will be white.
It is near, but not directly attached to the firewall on the drivers side. It's a 30 amp fuse in a little junction box near the master cylinder. ~greengina8
Should be located at the driver's side firewall
If you just want put new fluid in the master cylinder, draw it out and refill it, drive it for a a day or two and do it agian. If you have air in the lines - i would take it to a brake shop to have it drawn thru. If you pump the brakes on a truck that old you'll need a new master cylinder from all the dirt rubbing in the seals.
You can remove the 2000 Chevrolet Astro Van the ignition switch cylinder by removing the retaining ring. The retaining ring will need to be turned to the left. The ignition switch cylinder will slide out.
with your vague discription, id say master cylinder is shot.
2800