The LM317 voltage regulator can be set to any output voltage from 1.2 V to 37 V.
You must keep the input voltage between the maximum input voltage and the drop-out voltage for proper operation.
The maximum input voltage the LM317 is guaranteed to bear is 40 V.
The LM317 is guaranteed to operate when the input voltage is at least 3 volts above the set output voltage.
to prevent the high voltages The main purpose of an opto-isolator is "to prevent high voltages or rapidly changing voltages on one side of the circuit from damaging components or distorting transmissions on the other side."[2] Commercially available opto-isolators withstand input-to-output voltages up to 10 kV[3] and voltage transients with speeds up to 10 kV/μs.[4]
A series pass transistor allows the voltage to pass to the rest of the circuit. The current goes around the part of the circuit like an IC for example, that would be destroyed if too much current were to pass through it. Series pass transistors allows small voltages and small current parts, to control higher voltages and currents than they presently cannot do by themselves.
how much does it cost to have a ic controller p2610 fixed on a car for 2008 hyundia veracruz
The cost of IC of TV is Rs 1,450. Is it true or false, i want to know
The IC code is on the actual IC, you can find out its details by searching the IC code on Google.
ic made from bjt is known as bipolar ic
op amp linear ic 7805 non linear ic
The letters "IC" pronounced properly can say "icy" meaning very cold.
Both IC 7805 & IC 7905 are voltage regulators, IC 7805 is Ic 78xx series while IC 7905 is Ic 79xx series with xx representing voltage output
naming of IC is done according to manufacturer's name, ic type and IC number. i think MC means motorola is manufacturer. 74 means TTL IC. It is 7408 IC and H means high
For an IC chip
4026