For every block, you will use approximately 1.2 pounds of mortar
6 Bags of masons lime
In general, about half an inch of mortar is required to lay each hollow concrete block. The total amount of mortar needed can be calculated by multiplying this value by the number of blocks to be laid.
1.042 CF of concrete per unit
It depends on how much nickel is in there. At the time of writing, nickel is $11.13 per pound.
7 bags per 1000 on mortar mix and half a truckload of "mortar" sand aught to do it.
65 BLOCKS PER 74 POUND OF MORTAR (THAT YOU ADD SAND TO) 80 POUND PREMIX MORTAR JUST ADD WATER 27 BLOCK 8X8X16
21
6 Bags of masons lime
32
Very similar to regular block, but with a good grade of (usually white) mortar. Ask at a local flooring store what mortar they'd recomend.
A course of bricks or block and mortar is called masonary
are these concrete blocks and allowing for mortar. 12.5 per square metre, 62.5 per cubic metre with mortar
zero
Wet mortar is approximately 48 Kg per cubic foot.
BETWEEN 3AND5 DOLLARS EACH
In general, about half an inch of mortar is required to lay each hollow concrete block. The total amount of mortar needed can be calculated by multiplying this value by the number of blocks to be laid.
not a lot. but assuming 9"x3" and using this brick calculator it works out at 0.0003 cubic meters of mortar or 0.91kg of sand and 0.25kg of cement per brick.