1). If you cut off a piece that's 16ft 3in long, you're sure to have exactly what you need.
2). If you prefer to exercise your math, you could measure and cut 1ft 9infrom one end,
and trust on faith that the longer piece thus formed is what you want.
(No fair measuring it, though. If you were going to measure it anyway, you would have been
safer with Method #1 described above.)
A Big Black Botty is often a black woman who has a butt which measures over 39 inches. She also needs to have 10 inches difference in the measures of her waist and her butt.
The 1985 Chevrolet El Camino dipstick length is 27 inches. The dipstick needs to be exact in order to measure the oil properly.
An optometrist measures vision needs.
scope,needs and aim of the labour welfare measures
This question needs additional information. Kindly update and re-post it to get the correct answer.
The question needs to be clarified or corrected: feet per hour is [Length]/[time], and cubic inches per minute is [Length³]/[time]. They are not dimensionally equivalent.
If you are measuring in inches the formula is: multiply the length in inches x width in inches x height in inches then divide by 1728 to get cubic feet. If you are measuring in centimeters the formula is: multiply each centimeter by .39 to get inches. If you are measuring in cubic meters: divide each cubic meter by 35.5 to get cubic feet.
No. Not directly. It needs to be 18 inches away... in length, not distance according to the UPC. An 18 inch water heater flex would work or 18 inches of copper tube with a pex adapter on the end will work.
A three strand Turk's Head needs about 2 1/2 times the length a single strand takes to simply coil around 3 times. That is, if the circumference you are going around is 10 inches, it makes a 30 inch coil and will require 75 inches of line.
The battery that fits in a 2003 Saturn L300 is 10 and 3/4 inches in length. The width of the battery is 6 and 7/8 inches and the height is 7 and 1/4 inches. The battery needs to be a 12 volt battery that is a side post battery.
safety needs in mid
The standard length of a mens 3 wood is around 41-42 inches long. You will find that the length of shaft varies from manufacturer to manufacturer. You can also get custom fit where they may take an inch or two off your shaft.