0
How much oil do you add when changing oil in 73 Plymouth Barracuda?
Wiki User
∙ 11y ago
More than likely 5 quarts but to make 100% sure, park the vehicle on a level surface. Drain the oil and change the oil filter. Add 5 quarts of oil and start the engine. Let it run for 30 seconds and then shut down. Wait 30 minutes and check the oil level. If necessary add oil to reach the full mark. You now know the capacity.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How much trans fluid do you add to 2000 ford focus?
how much trans fluid do i add when changing trans fliud in my 2000 focus
Does add color to water tell about changing matter without changing its shape?
does add color to water tell about changing matter without changing its shape
How much transmission fluid to add after changing the filter on a 2001 buick lesabre?
7 to 7.5L of dexron 3
What type of oil and how much should you add after changing the oil in a 1992 Dodge Dakota?
Add 4.5 quarts 10w30, start engine, check and adjust level.
Add the years Jamestown Virginia and Plymouth Massachusetts were settled?
3
How much transmissiion fluid do you add after changing the fluid on 1991 ford pony escort?
It takes 6.5qt when empty/new with no oil in the cooler, but if you just changing the oil it will take 4.5 qt.
Where do I fill transmission fluid on a 1998 Plymouth Breeze?
add gasoline dumbo
How do you add transmission fluid to a 2000 Plymouth Voyager?
Down the transmission dipstick.
How much oil does a 93 grand am need 3.3?
You should add 4.5 liters of oil when changing the oil and the oil filter.
How much transmission fluid does a 1997 Plymouth voyager hold?
There should be a transmission fluid dipstick that should tell you how much you have and a mark telling how much you should have. DO NOT overfill as you can blow out your seals. I would add a pint at a time and check how much you have. (IANAMechanic)
Where do you add engine oil to a 99 Plymouth breeze?
Through the cap in the valve cover.
Where do you put transmission fluid at in 1997 Plymouth voyager?
You add it down the dipstick tube.
