1,000 psi
The output of a power steering pump is the high pressure side which goes to the steering box. It creates hydraulic pressure which makes steering much easier.
A power steering pumps as much as the power steering pump can pump.
Have you checked the power steering pressure line?
Around 500 to 800
Power steering power steering pressure switch is a part of power steering pump. There is wire harness connect to the pump, it's connect the switch. Find the harness you will find the switch.
The power steering pressure sensor is located on the front of the power steering pump. It is circular and has one wire going to it.
Power steering systems can be diagrammed into two chief components. These are the power steering pump and the rack-and-pinion steering gear. The power steering pump sends pressurized fluid into the rack which moves the gear actuating the tie-rods, which moves the wheels in the desired direction. The power steering pump has a low pressure return line and high pressure out one.
The power steering pressure switch, on a 1993 Chrysler New Yorker, is located below the power steering pump. The pressure switch is attached to the power steering reservoir mounting bracket.
On the back side of the power steering pump
On the back of the power steering pump.
it is on the pressure line off the power steering pump itself on the right side of the pump (if looking at the motor)
1000psi