0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How much salt do I initially add to change over to salt water pool?
That depends on the Chlorinator you intend to use and the size of the pool it would be wise to seek advise from the manufacturer of the chlorinator or the outlet from which you bought it. Saltwater pools use dissolved salt (3000-6000 ppm
How much salt needed for new pool?
The store where you bought the salt system can probably tell you how much. It all depends on how big, and thus how much water is in your pool. If you tell them the size and depth of the pool they should be able to tell you about how much salt you'll need to add.
Does your salt chlorinator regulate salt ppm?
No
Why does the Pool shop advises that l have too much salt in the pool and may have to empty it and start again what do you suggest?
Salt water pools should be maintained between 3000 and 4000 ppm. More salt than this will cause excessive scaling around the tiles and salt cell. Less salt will not produce enough chlorine gas to sanitize the pool.
How much salt for a 30 foot pool?
the amount of salt required depends on how much water is in the pool You will need enough salt to reach a concentration of 4000 ppm (parts per million) to start. Have the water tested for salt content at your pool shop (usualy free), then add then add enough to reach 4000 ppm.
What is the Ppm of salt in ocean water?
>30ppm in 100g =? mcg in 1g
how many pounds of salt do you add to a 12000 gallon swimming pool?
salt is based on PPM or parts per million and a salt system operates around 3000 PPM on most systems. If you have no salt in your pool the amount of salt to add would be around 200 pounds but if you have some salt in the system then you need to find the ppm already in the pool and adjust as needed. Do not forget to add cyneric acid or you will lose what sanitizer is produced on the hot days.
What is the freezing point of saltwater with a salt level of 3200 ppm?
3200ppm would have no affect on the freeze point of water, so your answer would be 32 degrees.
What should be the salt level be on a salt system pool?
The ideal salt level is between 2700-3400 ppm (parts per million) with 3200 ppm being optimal. Before adding salt to your pool, test the water to check your salt level.
How do you prepare solution in ppm?
You prepare a primary solution then dilute portion of your solution down to the required concentration. For example, you want a 10 ppm salt solution (10 mg/L), you dilute 1 g of salt in 1 L of water you get 1000 ppm salt solution. You take 10 ml of your salt solution (0.01 g salt in 10 g) and add in additional 980 ml of water then you get a 10 ppm weight solution.
What is the salt content ppm of sweat?
The concentration is very variable; as an indication 1 g/L.
1mg benzole trozole in 100 ml mathonal equals how many ppm?
100 µl Benzone Triazole in 100 ml Methanol equals 1 ppm
